VP100/20NET: Large NTP Display


Large LE-Display VP100/20NET and NTP slave clock.

Large display and NTP slave clock VP100/20 with good visibility and 50mm height LED characters. Text messages can be displayed: fixed, flashing or running characters, programmable via PC.

Key Features

Warranty Period (Years): 2 RoHS-compliant
  • NTP Slave Clock
  • 20 mA Interface
  • 50mm LED Display for Time and Date
  • RS-232 interface
  • Message Editor for Windows Operating Systems




Product Description



Characteristics

Display LED-Matrix Display (7 dots high) for time and date 50mm character height Without RF signal the clock runs on XTAL with an accuracy of ±1·10-5, indicated by LED
Interface One serial RS232/20mA interface
Serial Time String Output Baudrate: 9600 Baud
Dataformat: 7E2
1 active/passive 20mA current loop output (selectable)
1 active/passive 20mA current loop input (selectable)
Output string: 32 ASCII characters with date, time and status information
Electrical Connectors
  • 3 x 25-pin DSub female connector:
    PC IN, IN: Auxiliary inputs - for servicing purposes only
    OUT: Output for the time and message telegrams
  • 1 x 9-pin DSub female connector:
    Relay: Terminal Outputs
  • 10Base-T: Network connector, RJ-45
  • 230 V: Euro Socket for mains connections
Backup Battery Type In case of supply voltage failure the on-board RTC keeps the time based on XTAL for more than 100 hours
Operating Voltage 85-264VAC (50/60Hz) / 120-375VDC
Form Factor Plastic coated steel sheet case, black (optional: white), protection, IP30 protected
Physical Dimensions 996mm x 100mm x 60mm ( width x height x depth)
Supported Temperature Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F)
Supported Humidity Max. 85 % (non-condensing) at 40 °C
Contents of Shipment VP100/20 LE-Display, printed manual, power cord and angle brackets for wall mounting (for a vertically swiveling display).
Warranty Two-Year Warranty
RoHS Status of Product This product is fully RoHS-compliant.
WEEE Status of Product This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself.


Downloads

Short Info Sheet



Manuals

  • Handbuch (deutsch) zur Zeit nicht verfügbar.

Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.
Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact