LANTIME V7 Firmware - Changelogs

------------------------------------------

Version 7.00.014: [2020-12-17]
 - fix: Fixed NTP refid in case bypass NTP stratum is configured on MRS systems [3974]
 - fix: Support for model M300/TCR/PZF [3940]
 - fix: Update of OpenSSL to 1.1.1i [3945]
 - fix: Allow time zone configuration for second FDM card in IMS [3982]
 - fix: Firewall rules for virtual Cluster IP was not configured in all cases [3975]
 - fix: Fixed VSG181 configuration procedure if VSG180 was operating previously in the same slot [3949]

Version 7.00.013: [2020-12-01]
 - fix: Include stratum value in ext. NTP server selection algorithm [3943]
 - fix: Fixed NTP REFID parameter for non-MRS systems and systems without ext. servers [3942]

Version 7.00.012: [2020-11-13]
 - fix: Fixed re-scan process of previously disconnected clocks [ID:3828]
 - fix: Update OpenSSH to 8.4 [ID:3779]
 - fix: Corrected Link speed status for HPS cards operating in M900 [ID:3504]
 - fix: Big NTP offsets are now handled correctly with MRS NTP sync [ID:3852]
 - fix: Unicast Client lists have not been available from all PTP cards that are in Unicast Master state [ID:3832]
 - fix: Fixed ext. NTP server selection for MRS NTP sync [ID:3831]
 - fix: Fixed error if hostname contains the string "arm" [ID:3747]
 - fix: Offsets of PTP Slave cards are now correctly calculated in redundant systems with RSC [ID:3637]
 - fix: Corrected SSM values for LIU cards in T1 mode [ID:3636]

Version 7.00.011: [2020-09-25]
 - new: Full support for meta BMCA over differrent PTP Slave ports [ID:3466]
 - new: Allow PTP cards to act as Slave in all IMS Slot types [ID:3478]
 - new: Added new events SyncMon Error and SyncMon Clear [ID:2767]
 - fix: Use minimum clock class configuration correctly for MRS PTP input [ID:3464]
 - fix: Fixed MRS NTP synchronization if local time mode is used for NTP [ID:2791]
 - fix: Allow individual fixed offsets for different PTP Slave ports [ID:3479]
 - fix: Removed command line injection under super user rights in SyncMon RSync Server Configuration (severity low) [ID:3318]
 - fix: Permissions of home directory set to 700 [ID:3307]
 - fix: Hide changes in diff of the additional network config and user defined notification scripts [ID:3281]
 - fix: Fixed SyncMon Trigger config [ID:2730]
 - fix: Improved syslog message for logout [ID:2776]
 - fix: Email configuration not updated in any case if hostname or domain changed [ID:3409]
 - fix: Bonding status was not displayed correctly in web interface under certain conditions [ID:3403]
 - fix: Fixed limit checks in SyncMon in case trigger counter is 0 [ID:3359]
 - fix: Fixed activating and deleting config sets that have a '=' character in its name [ID:2753]
 - fix: Made sure that /etc/leap_second is updated after firmware upgrade [ID:2680]
 - fix: Non-available Enums will be displayed as a number [ID:2693]
 - fix: Fixed MRS NTP synchronization in case host names are used for upstream servers [ID:2756]
 - fix: As a non-root superuser, a "config changed" message was always printed when no changes were made [ID:2760]
 - fix: Fixed reboot, diag file, firmware and config backup commands on M300/FDM [ID:3320]
 - fix: Fixed misleading FDM error notification [ID:3322]
 - fix: Setting the clocks error relay via cmd line tool lt_cmd not working [ID:2765]
 - fix: Fixed FDM511 detection with newer CPU models on M300 [ID:3300]
 - fix: Fixed NTP MRS sync in case NTP access restrictions are configured [ID:2745]
 - fix: Force PTP mode to Multicast if PTPv1 is selected in Web UI [ID:2741]

Version 7.00.010: [2020-07-03]
 - fix: Fixed configuration problems of PIO cards if a card changed jumper settings [ID:2712]
 - fix: Improved reclock detection in systems with RSC if only once clock is installed [ID:2691]
 - fix: Support for AES128CMAC keys in SyncMon [ID:2475]
 - fix: Update of ntp to ntp-4.2.8p15 [ID:2521]
 - fix: Allow admin users to create config sets [ID:2654]
 - fix: Return correct number of power supplies in M1000 via SNMP [ID:2657]
 - fix: BPE with slave ports (non configurable) may loose configuration after power cycle [ID:2719]
 - fix: Fixed memory leak in SyncMon when using symmetric keys for monitoring NTP nodes [ID:2708]
 - fix: Update of OpenSSH to 8.3p1 [ID:2607]
 - fix: Fixed PTP offset transmission in systems with TSU-PXA or TSU-Gbe in PTP Slave state [ID:2671]
 - fix: Fixed configuration problems with VSG181 cards [ID:2725]
 - fix: Fixed wrong daylight saving information for australien time zone AEST/AEDT [ID:2648]
 - fix: Handle large offsets with NTP sync for MRS correctly. [ID:2642]
 - fix: Fixed clock state of MSF receiver on web ui main page [ID:2685]
 - fix: Generation of CSR failed in case of very long entries using spaces are used [ID:2717]
 - fix: Show IOConfig page in Web UI if VSI card is the only card in the system [ID:2713]
 - fix: Clear Power Supply Failure event in SyncFire correctly [ID:2703]
 - fix: HTTP service occasionally started even if deactivated on all interfaces [ID:2666]
 - fix: Fixed segmentation fault in CLI [ID:2694]

Version 7.00.009: [2020-05-18]
 - fix: Fixed initial sync problems on LANTIMEs without ref clocks (RDT) [ID:2633]
 - fix: Fixed GET command in REST API for status overview [ID:2549]
 - fix: Update of gnu:tar to 1.32 [ID:2439]
 - fix: Update of OpenSSL to 1.1.1g [ID:2522]
 - fix: Update of ntpload to 2.16c [ID:2529]
 - fix: Update of proftpd to 1.3.6c [ID:2527]
 - fix: Update of curl to 7.69.1 [ID:2526]
 - fix: OpenSSL 1.0.2 removed [ID:2528]
 
Version 7.00.008: [2020-04-09]
 - new: NTP Leap second file created based on GPS data [ID:1715]
 - new: Script edit functions can be disabled now [ID:1894]
 - new: Support for VSI180 [ID:1562]
 - new: Support for VSG180 and VSG181 improved/added [ID:1974]
 - fix: Update of OpenSSL to 1.1.1f [ID:2467]
 - fix: Restarting the SSH service via WebUI now works reliably [ID:2013]
 - fix: When LNE cards are added to the chassis, the corresponding virtual interfaces are now correctly created [ID:1734]
 - fix: Fixed missing firewall rule for VLAN tagged cluster interfaces [ID:1927]
 - fix: Added plausibilitiy checks in WEB UI for manual GPS position configuration [ID:1395]
 - fix: Error Message "missing prerequisite (SHA512)" not shown if activating V7 OSV [ID:1938]
 - fix: update_rootca_bundle calls correct script [ID:2483]
 - fix: Fixed PPS In priority option in case both MRI and ESI cards are present [ID:1890]
 - fix: OpenSSH Update to 8.2.p1 see https://www.openssh.com/txt/release-8.2 for changes [ID:1936]
 - fix: Optimized handling of special chars for passwords [ID:2006]
 - fix: Security improvements [ID:1968]
 - fix: Charset utf-8 in header of WebUI [ID:1888]
 - fix: Improved handling of blocked IP addresses [ID:1975]
 - fix: NTP Update to 4.2.8p14 [ID:1993]
 - fix: Removed possibility for info user to review config diffs [ID:1958]
 - fix: HSTS Header only sent for HTTPS responses [ID:1701]
 - fix: FDM Status now correctly shown in WebUI [ID:1978]
 - fix: Improved handling of HPS configuration modes in management process [ID:1940]
 - fix: Firewall rule correctly set up if NTP Manycast mode enabled [ID:1790]
 - fix: Verification of update file digital signature improved [ID:1854]
 - fix: WebUI Services table on Network page now handles more than 14 virtual interfaces correctly [ID:1878]
 - fix: Ipv6 router advertisements are now rejected if interface does not have autoconf enabled [ID:2137]
 - fix: Activation of configuration backup now works reliably [ID:2205]
 - fix: Do not disable main refclock after SHS time limit error event [ID:2022]
 - fix: Configuration of more than 12 network interfaces is now possible via the front panel display [ID:1963]
 - fix: RX and TX counters now work (again) for LNE ports [ID:1324]
 - fix: Serial interface state is now unaffected by changes in contact or location [ID:1971]
 - fix: Firewall now correctly updated after moving virtual interface from lan0 to lan1 [ID:2385]
 - fix: Unnecessary change of sync reference from PTP to another source is now prevented [ID:1858]
 - fix: Detection routine for reference clocks improved [ID:1969]
 - fix: Detection of redundant power supply now works reliably when adding a power supply while the device is powered on [ID:1995]
 - fix: sudo command now works for super users with shell access [ID:1977]
 - fix: Network interface order is now reliably detected after a factory reset [ID:1962]
 - fix: REST-API now correctly represents status of static IPv6 interfaces [ID:2464]
 - fix: Avoid memory leak when using AES128-CMAC Keys [ID:2465]
 - fix: Avoid increase of RAM usage while using PRP [ID:2466]
 
Version 7.00.007: [2020-02-24]
 - new: Adjusted asymmetry compensation values for NTP requests in SyncMon and MRS [ID:1697]
 - fix: Fixed Node status in SyncMon in case NTP Stratum Limit was exceeded [ID:1808]
 - fix: Removed empty restapi tab in web ui [ID:1593]
 - fix: Fixed Refclock LED state in case the second refclock is TCR type [ID:1842]
 - fix: Fixed 'Scan for new nodes' - new: in SyncMon [ID:1733]
 - fix: Status-update of ntp no longer prints UDP-NTP related Error-Messages. [ID:1555]
 - fix: Do not send unnecessary XMR reference Disconnected messages in NTP sync mode [ID:1714]
 - fix: Fixed label in SyncMon SV Status graph [ID:1853]
 - fix: Added input verification for some edit fields in web ui to prevent shell code execution even as super user [ID:1751]
 - fix: Persistentely save HaveQuick TX mode parameter [ID:1713]
 - fix: Added 'Back' button on SyncMon multiple nodes graph page [ID:1814]
 - fix: Fixed SSM output handling if 2MHz clock input is used for synchronization [ID:1797]
 - fix: Correct Slot for power supply now shown in device_version on M500 [ID:1696]
 
Version 7.00.006: [2020-01-20]
 - new: leap second file updated [ID:8928]
 - new: Re-enabled query for unicast client list from HPS100 [ID:8926]
 - fix: Adjusted NTP asymmetry offset for new CPU [ID:8944]
 - fix: fixed wrong status on front display if device is in holdover mode [ID:8947]
 - fix: fixed red refclock LED on M300/GPS in SimulationMode [ID:8946]
 - fix: SNMP service now starts correctly when enabled after having been disabled on all interfaces [ID:8940]
 - fix: fixed leap second file upload [ID:8924]
 - fix: e-Mail uses openssl 1.1.1 [ID:8931]
 - fix: ITU/TRS Limit status now logged correctly [ID:8925]
 - fix: Correct LED handling of LNE/SFP after hot plug event [ID:8923]
 - fix: SyncMon: Fixed problem when opening graphs for Refclock statistics [ID:8922]
 - fix: Fixed validation of user name when creating new user [ID:8918]
 - fix: OpenSSL Update to 1.0.2u (CVE-2019-1551) [ID:8908]
 - fix: Raise alarm on missing RSC card [ID:8906]
 
Version 7.00.005: [2019-12-23]
 - new: Show GNSS SV signal ratio and dual frequency indication [ID:8898]
 - new: SNMP: extended fractions of longitude and latitude values from 2 to 4 [ID:7069]
 - new: Support for VSI card [ID:8774]
 - new: Removed request for unicast client list of HPS100 cards [ID:8904]
 - fix: Fixed data storage problem in Syncmon after configuration changes [ID:8899]
 - fix: unnecessary syslog restarts every time a DHPC lease is renewed [ID:8855]
 - fix: Fixed link status on main page for PTP ports in M600 [ID:8831]
 - fix: route setup for NTP cluster interfaces did not work correctly [ID:8870]
 - fix: TSU pxa270v1.2: disabled external SSH connection [ID:8412]
 - fix: SyncMon: Filled empty fields in reports [ID:8851]
 
Version 7.00.004: [2019-11-14]
 - new: added NTP configuration parameter to disable true chimer option [ID:8769]
 - fix: Syncfire: fixed missing notification for Power Supply down [ID:8836]
 - fix: Improve configuration change output in web interface [ID:8808]
 - fix: fixed detecting TSU in M600 if DHCP is activated [ID:8822]
 - fix: update of rsync to 3.1.3 [ID:8799]
 - fix: libncursesw updated to 6.1 [ID:8791]
 - fix: zlib updated to 1.2.11 [ID:8790]
 - fix: libexpat updated to 2.2.9 [ID:8796]
 - fix: wpa_supplicant updated to 2.9 [ID:8797]
 - fix: nano updated to 4.5 [ID:8788]
 - fix: vim updated to 8.1 [ID:8787]
 - fix: tcpdump updated to 4.9.3 [ID:8784]
 - fix: libpcap updated to 1.9.1 [ID:8783]
 - fix: Modified/added http header Pragma, Cache-Control and Content-Security [ID:8767]
 - fix: Double free bug in TACACS+ module [ID:8753]
 
Version 7.00.003: [2019-10-21]
 - fix: fixed mounting /data partition on Syncfire [ID:8748]
 - fix: fixed external NTP server in MRS mode with big offsets [ID:8746]
 - fix: fixed wrong PTP port state in case of HPS card is in Monitoring mode [ID:8563]
 - fix: SyncMon: fixed scan for new nodes will add all nodes [ID:8739]
 
Version 7.00.002: [2019-10-14]
 - new: Added automatic redirect from http to https [ID:5741]
 - new: Support for FCU200 [ID:8624]
 - new: added group selection algorithm to select best external NTP server [ID:8622]
 - new: added NTP statistic support for external NTP server in MRS Mode [ID:8620]
 - new: support for external NTP server with key in MRS Mode [ID:8618]
 - new: SyncMon: Added new input nodes for HPS statistics [ID:8616]
 - fix: Syslog supports TLS [ID:7429]
 - fix: OpenSSH updated to 8.1p1 [ID:8730]
 - fix: SyncMon: send two notifications ('Sync Monitor' and 'IMS Error') if flash has been changed to readonly or other failure [ID:8697]
 - fix: Restart NTP on HPS in case key file is updated [ID:8633]
 - fix: fixed problem of corrupted XMR priorities when starting with a new hardware configuration [ID:8652]
 - fix: OpenSSL update to 1.0.2t and 1.1.1d [ID:8659]
 - fix: fixed activating SHS-Time-Limit-Error with RSC - waiting for 5 times SHS_STATE_ERROR from RSC [ID:8589]
 
Version 7.00.001: [2019-08-06]
 - new: --rel-path added to view/export [ID:8186]
 - new: only super users are allowed to download private key of certificate [ID:7964]
 - new: pkcs12 support for certificates is added [ID:7750]
 - new: ntp-4.2.8p13 [ID:8100]
 - new: disabled writing SyncMon event messages to syslog [ID:8030]
 - new: added new front panel menu entry for USB-Stick: Save current config as Startup [ID:7811]
 - new: forced reload of refclock configuration when changing from SHS to redundant mode (to disable simulation mode of second refclock) [ID:7953]
 - new: added human readable time to signal logs for DCT/MSF/PZF [ID:7947]
 - new: TSU-GbE: In Multicast Auto mode set clock class to 6 in case the clock is sync to GNSS [ID:6814]
 - new: Reduced root dispersion for ntpd [ID:7111]
 - new: Change severity for event redundancy not available from error to warning level [ID:7680]
 - new: configurable SNMP options determined by selected SNMP version [ID:7356]
 - new: message is displayed during upload of self signed certificate, also a notification is generated [ID:7354]
 - new: added dir_listing for /data in get_diag_file [ID:7466]
 - new: fixed sending configuration to refclock only if changes are found [ID:7424]
 - new: RSC in IMS device can be controlled via lt_cmd and front panel [ID:7425]
 - new: Web Timeout option moved to security tab [ID:7173]
 - new: added feature for utility profile 6185093 for M600 PXA270 [ID:6946]
 - new: added location string to Splunk and JSON output [ID:6807]
 - new: Xtrastats removed from web interface and replaced by SyncMon [ID:6739]
 - new: SyncMon: added new internal Sensor for NTP Counter [ID:6658]
 - new: SyncMon: added new internal Sensor for Memory Usage [ID:6657]
 - new: SSH now only allows 10 concurrent sessions per device [ID:6408]
 - new: new config file /usr/share/snmp/snmpd.conf.add allows custom user configuration for snmpd [ID:6587]
 - new: added new parameter in msc.cfg 'DISABLE BOOT LOGO ON DISPLAY' (with CPC Version 1.3.5) [ID:6614]
 - new: in case of M1000 manual mode of internal Switchcard RSC can be activated via front panel [ID:3993]
 - new: Timescale of display adapted if refclock is GPS or TAI or blank if display timezone is not UTC [ID:6390]
 - new: RSC180: Display clock frequency if supported [ID:6481]
 - fix: update of libssh to libssh-0.9.0 [ID:8552]
 - fix: fixed TCP SACK vulnerability (CVE-2019-11477, CVE-2019-11478, CVE-2019-11479) [ID:8461]
 - fix: no downgrade to V6 for admin user [ID:8430]
 - fix: OpenSSL updated to 1.0.2s and 1.1.1c [ID:8402]
 - fix: net-snmp5.8 doublefree patch added [ID:8350]
 - fix: Startwizard cannot be started with setup, has to be called with /wizard/startwizard instead [ID:8303]
 - fix: Fixed removal of cluster interfaces [ID:8297]
 - fix: fixed Previously configured static IPv6 address had not been removed [ID:6865]
 - fix: Fixed and protected sending refclock status info to HPS cards that could result in wrong BMCA quality parameters [ID:8189]
 - fix: OpenSSH update to 8_0_P1 [ID:8269]
 - fix: syslog-ng updated to 3.20.1 [ID:8245]
 - fix: /status/system/power wont be visible if there are no IMS-Modules. [ID:8202]
 - fix: root ca bundle can be customized [ID:8244]
 - fix: lt_cli supports non-root super-user [ID:8175]
 - fix: Configuration changes overview in web ui now hides all passwords saved in config files [ID:7040]
 - fix: delete-ext-ntp-cfg fixed [ID:6932]
 - fix: LT_CLI wont load non-exist clocks [ID:8211]
 - fix: fixed internal power consumptions of different IMS modules [ID:8194]
 - fix: logging in linux standard files (i.e. messages, auth, kern...) [ID:8154]
 - fix: support of intermediate certificates, and stronger ciphers support [ID:7966]
 - fix: PTP-UUID fixed [ID:8152]
 - fix: LT_CLI should no longer skip commit when no FDM get detected [ID:8148]
 - fix: admin users are not allowed to edit external authentication configuration [ID:8131]
 - fix: rework of web timeout function to mitigate double authentication requests [ID:7981]
 - fix: Update web server lighttpd to 1.4.53 [ID:7098]
 - fix: libssh-0.7.7 [ID:7630]
 - fix: fixed saving config parameter 'trigger below limit' [ID:7602]
 - fix: svccfg check falsely detected file changes [ID:8066]
 - fix: fixed syntax error in snmp mib [ID:8044]
 - fix: slightly changed syslog message, if logging in via web interface [ID:7982]
 - fix: http authentication is cached for three minutes by default [ID:7985]
 - fix: fixed sporadically ntp not sync messages in case of many configured external NTP server [ID:7941]
 - fix: samba deleted [ID:7789]
 - fix: fixed wrong refid in NTP configuration file [ID:7954]
 - fix: fixed writing signal log for DCT/MSF and PZF every minute in case of 2 refclocks [ID:7943]
 - fix: added /var/log/pzf_signal_2.log /var/log/dcf_signal.log to /etc/logrotate.d/pzf_signal [ID:7949]
 - fix: jquery lib deleted [ID:7861]
 - fix: status http or https took too long [ID:7833]
 - fix: configurable NAS IP identifier for radius auth [ID:7852]
 - fix: Error-Message only appears at programstart [ID:6702]
 - fix: Fix for CVE-2018-10834 - Arbitrary File Read CVE-2018-10835 - Arbitrary File Upload CVE-2018-10836 - Information Disclosure [ID:6927]
 - fix: noreferrer tags are added to links in the web interface [ID:7697]
 - fix: fixed missing notification if SHS timelimit warning has been cleared [ID:7606]
 - fix: sudo updated to 1.8.25p1 [ID:7601]
 - fix: sshd is forced to use dh prime greater than or exact 3071 [ID:7523]
 - fix: tcp/80 port closed when neither HTTP nor HTTPS+Redirect enabled [ID:7447]
 - fix: PRP Interfaces on LNE-SFP [ID:6225]
 - fix: DHCP provided gateway did not always work [ID:6244]
 - fix: LNE-SFP module was occasionally not correctly initialized during system startup [ID:5815]
 - fix: SSH - disabled weak aes[128|192|256]cbc cipher algorithms [ID:6968]
 - fix: proftpd-1.3.6 [ID:7420]
 - fix: diffie hellman parameters are generated for each device separately [ID:6973]
 - fix: SSL certificates now signed using SHA256, minimum key length set to 2048 bit [ID:6970]
 - fix: fixed missing header line in mrs_stats [ID:7411]
 - fix: new content security policy header added to http/s response [ID:7391]
 - fix: snmp updated to v5.8 [ID:7232]
 - fix: Added support for digitally signed firmware updates [ID:7242]
 - fix: only super users are allowed to edit miscellaneous configuration [ID:7082]
 - fix: only super users are allowed to upload custom leap second files [ID:7084]
 - fix: only super users are allowed to generate certificates [ID:7078]
 - fix: logged in users are shown to super users only [ID:7046]
 - fix: SNMP community fields are treated as password fields [ID:7042]
 - fix: secrets in configuration files are displayed in disguise over web interface [ID:7038]
 - fix: SNMP community fields are treated as password fields [ID:7014]
 - fix: fixed menu control in Havequick Input/Output menu for M300 display (GPS,PZF,TCR,LWR) [ID:7361]
 - fix: activation of certificate expired warning changed from 60, 30 and 15 to 90, 60 and 30 days [ID:7307]
 - fix: fixed some cross site scripting vulnerabilities on various sites [ID:7077]
 - fix: only super users are allowed to replace configurations [ID:7033]
 - fix: Miscellaneous Configuration is not displayed for admin users due to security reasons [ID:7081]
 - fix: fixed some command line injection vulnerabilities [ID:7186]
 - fix: http redirect to https enabled by default [ID:7254]
 - fix: Webshell update to 2.20 due to security reasons [ID:7255]
 - fix: telnet update to netcat 0.7.1 and telnetd (GNU inetutils) 1.9.4 [ID:7243]
 - fix: Unnecessary Syncmon Error-Message will no longer appear [ID:6728]
 - fix: delete-interface command fixed [ID:6931]
 - fix: device discovery (avahi) disabled by default [ID:7053]
 - fix: Linux kernel update to 4.14.58 [ID:7048]
 - fix: access to web functionalities are enforced server side [ID:7037]
 - fix: http/s browser caching is disabled [ID:7024]
 - fix: cross-site scripting filter added to web interface [ID:7021]
 - fix: http/s header set to avoid click jacking attacks [ID:7015]
 - fix: only super users are able to download or upload LANTIME configuration files [ID:7009]
 - fix: added 'restrict default noepeer' to ntp.conf by default [ID:7067]
 - fix: XtraStats show-graph minimum size changed to made the graph more readable [ID:6810]
 - fix: VSG: Selected time zone not displayed correctly [ID:6666]
 - fix: Synthesizer configuration below 1Hz not possible via web interface [ID:6662]
 - fix: fixed problem with net-link-mode on Syncfire: convert possible netlink modes to netlink mode [ID:6789]
 - fix: monitor-graph gets stopped incase of an error [ID:6701]
 - fix: fixed setting SSM clock quality parameters for TCR [ID:6766]
 - fix: fixed type in SyncMap [ID:6664]
 - fix: Uploads to the unit only possible as super-user anymore [ID:6746]
 - fix: fixed M4000 with wrong model code [ID:6731]
 - fix: web UI logfile rotation did not work properly under all circumstances [ID:6733]
 - fix: NTP counters do not count local access from 127.0.0.1 [ID:3646]
 - fix: Allowing to mount storage devices during startup with /etc/mbg/fstab.add [ID:6127]
 - fix: SSH Key Generation did not work reliably [ID:6110]
 - fix: fixed calculating MRS IRSA holdover time for OCXO/DHQ [ID:6570]
 - fix: fixed switching LEDs of LNE/SFP in case of hotplug event [ID:6337]
 - fix: fixed word wrap of event counter in case of small window size [ID:6367]
 - fix: fixed unnecessary status change of refclock in case of hotplug event [ID:6385]
 - fix: fixed setting time on TSU in M600 [ID:6404]
 - fix: fixed checking redundant power supplies and netlink while scanning for time string in RDT systems [ID:6463]
 - fix: fixed wrong sign of measured offset with PTP/TLV [ID:6488]
 - fix: fixed wrong SyncE source in MRS priorities when changing HPS card in MRI1 slot against a MRI card [ID:6506]
 - fix: fixed setting GNSS mode with refclock GNS/UC via front panel [ID:6546]
 - fix: Remove PTP slave modes from ESI2 and MRI2 slots if no second refclock avail [ID:6378]
 - fix: MRS alarms correctly cleared if source deselected [ID:6261]
 - fix: long boot time for non IMS-systems with redundant power supply [ID:6249]
 - fix: SyncMon: fixed monitoring did not start at HPS in MRI1 [ID:6227]


Close LTOS 7.00 Changelog