LANTIME V6 Firmware - Changelogs

------------------------------------------

Version 6.24.035:   [2022-12-12]
 - fix: Update of curl to 7.86.0 [9531]
 - fix: Update of sudo to 1.9.12p1 [9519]
 - fix: Update of dbus to 1.12.24 [9518]
 - fix: Update of OpenSSL to 1.1.1s [9443]
 - fix: Update of zlib to 1.2.13 [9446]
 - fix: Update of OpenSSH to 9.1p1 [9440]

Version 6.24.034:   [2022-10-04]
 - fix: Re-calibrated NTP asymmetry offset [9397]
 - fix: Kernel Update to 4.9.327 [9428]
 - fix: Update of rsync to 3.2.5 [9432]
 - fix: Update of zlib to 1.2.12.1 [9431]

Version 6.24.033:   [2022-07-12]
 - fix: Update of OpenSSL to 1.1.1q [9408]
 - fix: Update of curl to 7.84.0 [9407]
 - fix: Mitigation of user enumeration attacks [9406]

Version 6.24.032:   [2022-05-13]
 - fix: Update of OpenSSL to 1.1.1o [9396]

Version 6.24.031:   [2022-05-04]
 - fix: Update z lib to 1.2.12 [9395]

Version 6.24.030:   [2022-03-28]
 - fix: Update of libexpat to 2.4.7 [9391]
 - fix: Update of OpenSSH to 8.9 [9390]
 - fix: Update of OpenSSL to 1.1.1n [9389]

Version 6.24.029:   [2021-09-17]
 - fix: "Save config as" and "delete config" can only access predefined directories [9341]
 - fix: Admin users are not allowed to delete system users anymore [9343]
 - fix: Update of Linux lernel to 4.9.281 [9344]
 - fix: REST-API and scp/ssh did not honor the disableRootLogin parameter [9342]
 - fix: Update of OpenSSL to 1.1.1l [9360]
 - fix: Update of OpenSSH to 8.7p1 [9358]

Version 6.24.028:   [2021-04-16]
 - fix: Adjusted length of Leap Second File URL field [9299]
 - fix: Update of OpenSSL to 1.1.1k [9308]
 - new: sshd config manual update mechanism added [9286]
 - fix: Added input validation in SyncMon [9279]
 - fix: Update of OpenSSH to 8.5p1 [9303]
 - fix: File access rights of /etc/groups and /etc/hosts changed  [9302]
 - fix: Update of sudo to 1.9.5p2 [9288]
 - fix: New ssh firmware default cipher list [9281]
 - fix: New firmware default SSL cipher suites [9271]

Version 6.24.027:   [2020-12-18]
 - fix: Fixed problems with MRS priority list in case of having an MRI and ESI card associated with a clock [9269]
 - fix: Update of OpenSSL to 1.1.1i [9256]
 - fix  webserver linked against OpenSSL 1.1.1 [9262]
 - fix: NTPd linked against OpenSSL 1.1.1 [9260]
 - fix: net-snmp linked against OpenSSL 1.1.1 [9259]
 - fix: Update of OpenSSH to 8.4 and linked against OpenSSL 1.1.1 [9258]

Version 6.24.026:   [2020-08-05]
 - fix: AES128-CMAC ntp keys also usable with Syncfire [9155]
 - fix: Internal TSU connection via OpenSSH fixed [9147]
 - fix: Update of ntp to 4.2.8.p15 [9122]
 - fix: Update of OpenSSH to 8.3 p1 [9079]
 
Version 6.24.025: [2020-04-22]
 - fix: Security improvements [ID:9010]
 - fix: Improved handling of blocked IP addresses [ID:9013]
 - fix: Removed possibility for info user to review config diffs [ID:9012]
 - fix: Update of ntp 4.2.8p14 [ID:9014]
 
Version 6.24.024: [2020-01-29]
 - fix: admin user is not allowed to reset device to factory defaults [ID:8949]
 - fix: Miscellaneous Configuration fields are not displayed for admin users due to security reasons [ID:8951]
 - fix: admin users are not allowed to edit external authentication configuration [ID:8952]
 - fix: secrets in configuration files are displayed in disguise over web interface [ID:8953]
 - fix: only super users are able to download or upload LANTIME configuration files [ID:8948]
 - fix: access to web functionalities are enforced server side [ID:8874]
 - fix: fixed some cross site scripting vulnerabilities on various sites [ID:8873]
 - new: leap second file update for NTP [ID:8929]
 - fix: Fixed user name validation while creating a new user [ID:8917]
 - fix: Updated OpenSSL to 1.0.2u [ID:8905]
 - fix: Configuration changes overview in web ui now hides all passwords saved in config files [ID:8901]
 - new: Support for FCU200 [ID:8892]
 - fix: fixed command line injection vulnerabilities in SyncMon [ID:8867]
 - fix: Webshell update to 2.20 due to security reasons [ID:8871]
 - fix: Fixed several potential command line injection vulnerabilities by adding input validation [ID:8885]
 - fix: SNMP community fields are treated as password fields [ID:8878]
 - fix: Fix for CVE-2018-10834 - Arbitrary File Read CVE-2018-10835 - Arbitrary File Upload CVE-2018-10836 - Information Disclosure [ID:8872]
 - fix: Info user can ot download a diagnostic file anymore [ID:8866]
 - fix: only super users are allowed to edit miscellaneous configuration [ID:8876]
 - fix: http/s header set to avoid click jacking attacks [ID:8875]
 - fix: logged in users are shown to super users only [ID:8877]
 - fix: noreferrer tags are added to links in the web interface [ID:8884]
 - fix: Modified/added http header Pragma, Cache-Control and Content-Security-Policy [ID:8868]
 - fix: TSU pxa270v1.2: disabled external SSH connection [ID:8869]
 - fix: OpenSSH updated to 8.1p1 [ID:8729]
 - fix: fixed problem of corrupted XMR priorities when starting with a new hardware configuration [ID:8651]
 
Version 6.24.023: [2019-08-06]
 - fix: Changed default Leapseconds to 18 seconds on startup [ID:8530]
 
Version 6.24.022: [2019-07-09]
 - fix: restore config backup procedure improved [ID:8376]
 - fix: fixed TCP SACK vulnerability (CVE-2019-11477, CVE-2019-11478, CVE-2019-11479) [ID:8469]
 - fix: net-snmp5.8 double free patch added [ID:8349]
 - fix: Update to OpenSSH_8.0_P1 [ID:8348]
 - fix: fixed TSU PXA270/v2.4 in M600/M900: fixed Alternate-Time_Scale-TLV for Power IEEE C37.238-2011 [ID:8219]
 - fix: fixed internal power consumptions of different IMS modules [ID:8193]
 - fix: Fixed and protected sending refclock status info to HPS cards that could result in wrong BMCA quality parameters [ID:8188]
 - new: RDT: added support for NMEA with 9600, 19200, 38400, 115200 Baud [ID:8165]
 - fix: Configuration with more than one PRP interface group did not work reliably [ID:8115]
 
Version 6.24.021: [2019-03-11]
 - new: ntp-4.2.8p13 [ID:8099]
 - fix: Update of bash to version 4.4.18 [ID:7001]
 - fix: now checks if SHA512 passwords are in use and prevents older firmware without SHA512 support to be installed [ID:6460]
 - fix: cbc ciphers removed from sshd config, chacha20-poly1305 added [ID:8006]
 - fix: Keeping the PTP Status page open on the WebUI led to dropped packets after a while [ID:8057]
 - fix: OpenSSL update to 1.0.2r [ID:8082]
 - fix: fixed syntax error in snmp mib file MBG-LANTIME-NG-MIB [ID:8043]
 - new: added new front panel menu entry for USB-Stick: Save current config as Startup [ID:7810]
 - fix: fixed SyncFire displaying wrong NTP state [ID:7977]
 - fix: SF1xx: fixed support for satellite info in /ref_info [ID:7958]
 - fix: SF1xx: fixed support for satellite info in /ref_info [ID:7967]
 - fix: SF1xx: fixed support for satellite info in /ref_info [ID:7969]
 - fix: fixed sporadically ntp not sync messages in case of many configured external NTP server [ID:7940]
 - fix: fixed wrong refid in NTP configuration file [ID:7393]
 - fix: forced reload of refclock configuration when changing from SHS to redundant mode (to disable simulation mode of second refclock) [ID:7903]
 - fix: added /var/log/pzf_dct_2_signal.log and /var/log/dct_signal.log to /etc/logrotate.d/pzf_signal [ID:7948]
 - new: added human readable time to signal logs for DCT/MSF/PZF [ID:7946]
 - fix: fixed writing signal log for DCT/MSF and PZF every minute in case of 2 refclocks [ID:7942]
 
Version 6.24.020: [2019-01-28]
 - new: added new refclock types to SNMP object mbgLtNgRefclockType [ID:7930]
 - fix: fixed reading ntpq status - triggered wrong status 'NTP sync' [ID:7927]
 
Version 6.24.019: [2019-01-17]
 - fix: CPU serialnumber not displayed [ID:7915]
 
Version 6.24.018: [2019-01-16]
 - fix: Improving cleanup procedures for logfiles of webUI [ID:7913]
 - fix: Web UI did not work on VLAN interfaces [ID:7872]
 - fix: netconfig engine wrongly added already existing firewall rule during reconfiguration [ID:7886]
 - fix: Bugs in handling SNMPv3 boot counter and EngineID have been fixed to comply with corresponding RFCs [ID:7883]
 - fix: Fixed support for SCU in M900 [ID:7855]
 - fix: configurable NAS IP identifier for radius auth [ID:7851]
 
Version 6.24.017: [2018-11-30]
 - fix: fixed sending configuration to TCR refclock [ID:7800]
 - fix: Fixed FDM daylight saving time calculation [ID:7797]
 - fix: Display Unicast connections for PTP Clients in IPv6 correctly [ID:6843]
 
Version 6.24.016: [2018-11-22]
 - fix: fixed GNS sat info [ID:7746]
 - fix: tacacs server port configuration fixed [ID:7760]
 - fix: OpenSSL 1.0.2q update [ID:7748]
 - fix: Upload Volume handling broken for a few hardware configurations [ID:7646]
 - fix: Syncfire: fixed power supply failure events [ID:7723]
 - fix: Syncfire: fixed DAC value of GNS181/PEX on front display [ID:7725]
 - fix: Syncfire: fixed setting SNS mode for GNS181/PEX [ID:7727]
 - fix: Optimized network configuration engine workflow to avoid missing logical interfaces [ID:7673]
 - fix: update of OpenSSH to version 7.9p1 [ID:7729]
 - fix: fixed reset xmr alarms in case of source was removed [ID:7688]
 - fix: fixed unnecessary restarts of TSU/GBE when adding a new TSU [ID:7628]
 - fix: fixed copying serial port paramters from COM1 to COM2 in case of IMS systems [ID:7669]
 - fix: removed fixed sporadically messages 'RDT: detected Refclock' [ID:7514]
 - new: fixed reference status in /ref_info for DCT/MSF/WWVB in IMS system [ID:7510]
 - new: removed /etc/ptp2/ directories from diagnostic file (get_diag_file) [ID:7648]
 - fix: fixed connection tracking for incoming ntp requests [ID:7659]
 - fix: fixed missing lantime messages if XMR reference changed [ID:7516]
 - fix: missing notification if SHS timelimit warning has been cleared [ID:7605]
 - new: added dir_listing for /data in get_diag_file [ID:7465]
 - new: fixed sending configuration to refclock only if changes are found [ID:7423]
 
Version 6.24.015: [2018-09-11]
 - new: Time Zone Support VSG [ID:7442]
 - fix: openssl updated to v1.0.2p [ID:7439]
 - fix: net-snmp updated to v5.8 [ID:7438]
 - fix: config file for sshd changed to /etc/ssh/sshd.cfg [ID:7407]
 - fix: fixed missing header line in mrs_stats [ID:7410]
 - fix: Adding and deleting of FDM Receivers via the web interface did not work properly [ID:7383]
 - fix: fixed menu control in Havequick Input/Output menu for M300 display (GPS,PZF,TCR,LWR) [ID:7360]
 - fix: fixed sending power_supply_0 failure if an other power supply failed [ID:7338]
 - fix: added comment in ntp.conf if 'BYPASS Stratum' activated to force a restart of ntpd [ID:7277]
 - fix: HTTPS service not restarted in any cases after uploading new certificate [ID:7257]
 - fix: disabled option PTP one-step in case of M600 [ID:7214]
 - fix: NTP version ntp-4.2.8p12 [ID:7263]
 - fix: Monitoring of system resources deactivated after firmware update [ID:7198]
 
Version 6.24.014: [2018-07-09]
 - fix: Access to HPS100 cards are now protected against simultanous requests from different processes [ID:7159]
 - fix: reduced count of logfiles in /var/log to 2 days and compress [ID:7142]
 - fix: fixed refclockstate via socket or snmp [ID:7140]
 - fix: XtraStats did not show correct data files [ID:6164]
 
Version 6.24.013: [2018-06-27]
 - new: Reduced root dispersion for ntpd [ID:7110]
 - fix: added 'restrict default noepeer' to ntp.conf by default [ID:7066]
 - new: Added IPv6 support for HPS in NTP Mode (Requires HPS firmware 1.4.0) [ID:7070]
 - fix: fixed requesting cluster information via SNMP [ID:7055]
 - fix: fixed procedure for 'reclock not responding' in case of unplugging a refclock [ID:6982]
 - fix: 'Monitor Interface' function for PTP modules didn't work correctly [ID:7035]
 - fix: deleting virtual interfaces via web interface did not work properly [ID:7003]
 - new: Added feature to disable the 'power redundancy not available' warning [ID:6979]
 - fix: M1000S did not raise notification in case of a fan error [ID:6977]
 - fix: changing web interface language to German did not work properly in 6.24.012 [ID:6942]
 - new: added feature for utility profile 6185093 for M600 PXA270 [ID:6945]
 
Version 6.24.012: [2018-05-30]
 - fix: Fixed detection of number of power supplies [ID:6913]
 - fix: TSU-GbE: Previously configured static IPv6 address had not been removed [ID:6864]
 - fix: SNMP passphrase: enhance allowed charset from 0x21-0x7e [ID:6846]
 - fix: TSU-GbE: PTP Stack sometimes did not send packets if DHCP was activated [ID:6822]
 - new: TSU-GbE: In Multicast Auto mode set clock class to 6 in case the clock is sync to GNSS [ID:6813]
 - new: added location string to Splunk and JSON output [ID:6806]
 - fix: fixed problem with net-link-mode on Syncfire: convert possible netlink modes to netlink mode [ID:6788]
 
Version 6.24.011: [2018-04-24]
 - fix: Enable 128 sync/del req. msg/s for PTP profile ITU-T. G. 8275.2 [ID:6762]
 - fix: Fixed SSM-QL output support for non-GNSS based refclocks [ID:6765]
 
Version 6.24.010: [2018-04-19]
 - fix: TSU-GbE: Module could hang on reboot in NTP server mode if a large number of clients are requesting NTP packets [ID:6748]
 - fix: rotating the web UI logfiles did not always work as required, leading to a lack of space for /var [ID:6732]
 - fix: fixed M4000 with wrong model code [ID:6730]
 - fix: LNE-SFP module was occasionally not correctly initialized during system startup [ID:5814]
 - fix: TSU-GbE: Fixed Multicast Auto Mode for Proifile G.8275.1 -> set portNotSlave to false [ID:6654]
 - fix: TSU-GbE: Fixed transition from SLAVE to MASTER in Multicast Auto Mode [ID:6652]
 - fix: TSU-GbE: Fixed network driver to avoid kernel oops on reboot [ID:6650]
 - fix: Fixed SSM Output handling in case Freq Input without SSM via ESI module was used [ID:6648]
 - fix: Fixed firewall rules for NTP cluster IP [ID:6625]
 
Version 6.24.009: [2018-03-15]
 - fix: fixed setting GNSS mode with refclock GNS/UC via front panel [ID:6545]
 - fix: fixed mismatch of DAC-Cal and DAC-Val in file /xmr_info [ID:6511]
 - fix: fixed checking redundant power supplies and netlink while scanning for time string in RDT systems [ID:6462]
 - new: NTP Version 4.2.8p11 [ID:6525]
 - fix: fixed wrong SyncE source in MRS priorities when changing HPS card in MRI1 slot against a MRI card [ID:6505]
 - fix: ssh key generation did not work reliably [ID:6470]
 - new: MRS Status: Display which PTP card used for synchronization [ID:6450]
 - new: Add BPE io port support (BPE3082/BPE6042) [ID:6492]
 - fix: fixed wrong sign of measured offset with PTP/TLV [ID:6487]
 - fix: REL1000: Added configurable support for all ports [ID:6472]
 
Version 6.24.008: [2018-02-22]
 - fix: Hidden ioconfig menue if only IMS-GTS card installed [ID:6466]
 
Version 6.24.007: [2018-02-23]
 - fix: TSU-GbE: Set startingBoundaryHops value to 32 in Management Message for SMPTE profile as default [ID:6464]
 - fix: Remove unnecessary power info on SyncFire models [ID:6333]
 - new: New OpenSSL version 1.0.2n with TLS 1.2. Support for 1.1 and 1.0 removed in default configuration. [ID:6438]
 - fix: XHE: No alarm triggered in case XHE was not connected at all [ID:6436]
 - fix: if SHS timelimit warning and error were 0 then do not send timelimit warning at startup [ID:6409]
 - fix: BIRD routing daemon did not start due to wrong handling of parameters [ID:6428]
 - fix: PTP Status tab sometimes indicated a "no link" state when a link was established using an SFP [ID:6357]
 - fix: TACACS+ Timeout of 20 seconds to avoid open connections [ID:6418]
 - new: SSH default configuration now allows a maximum of 10 concurrent sessions [ID:6407]
 - fix: IPv6 static addresses for bonding/prp interfaces only worked after a reboot [ID:6201]
 - fix: fixed setting time on TSU in M600 [ID:6403]
 - fix: PRP Configuration not reliably applied after reboot [ID:6224]
 - fix: fixed switching LEDs of LNE/SFP in case of hotplug event [ID:6336]
 - new: Timescale of display adapted if refclock is GPS or TAI or blank if display timezone is not UTC [ID:6388]
 - fix: fixed unnecessary status change of refclock in case of hotplug event [ID:6384]
 - new: Optimized PTP clock_accuracy setting when using IRIG-DC as reference [ID:6371]
 - fix: fixed word wrap of event counter in case of small window size [ID:6366]
 - fix: fixed reading good-svs and svs-in-view via SNMP and SyncMon [ID:6368]
 - new: Add port monitoring for PTP [ID:6359]
 - new: SyncMon: fixed background color from transparent to white [ID:6056]
 - fix: fixed PTP270 Master failover [ID:6283]
 - fix: MRS alarms correctly cleared if source deselected [ID:6260]
 - fix: Optimized handling of MRS precisions [ID:6347]
 
Version 6.24.006: [2018-01-23]
 - fix: Xtra Stats not working on devices with GNS receiver [ID:6312]
 - fix: SyncMon: fixed source ip routing on virtual network interfaces [ID:6304]
 - fix: fixed missing notification for low system resources [ID:6296]
 - fix: fixed SyncMon NTP nodes not reachable when specific interface selected [ID:6279]
 - fix: usrmgr CLI command did not correctly handle missing user name [ID:6251]
 - fix: saveconfig printed misleading error message [ID:5837]
 - new: OpenSSL 1.0.2n [ID:6265]
 
Version 6.24.005: [2017-12-22]
 - fix: long boot time for non IMS-systems with redundant power supply [ID:6248]
 - fix: Some DHCP Servers did not send routers if not specifically requested by client [ID:6243]
 - fix: syslog sometimes did not correctly set up config file [ID:6061]
 - new: External NTP Server: new hidden parameter to NTP_XMR_REF_CHANGED disable notifications in msc.cfg 'MRS NTP DISABLE NOTIFICATION' [ID:6151]
 - fix: SyncMon: fixed monitoring did not start at HPS in MRI1 [ID:6226]
 - fix: Redundant Power Supply: fixed support for powersupply overview on non IMS systems [ID:6213]
 - fix: Clock misc menu not display anymore if IRIG option not available [ID:6212]
 
Version 6.24.004: [2017-12-15]
 - fix: IPv6 support TELNET, TIME, DAYTIME [ID:6210]
 - fix: Current alarms correctly displayed on main page [ID:6186]
 - fix: PTP: Alternate Time Offset Indicator TLV was not always enabled although selected in web interface [ID:6180]
 - fix: MRS Fixed offset configuration was not possible with all input sources [ID:6169]
 - fix: Fixed dynamic SMPTE/Power TLV calculations if more than one MASTER PTP card is active [ID:6167]
 - new: Feature: PTP packet counter and unicast connection info available in web interface [ID:6158]
 - fix: WEB: PTP Network VLAN option was not visible after settings have been saved [ID:6124]
 - fix: Cluster did not send a gratuitous arp after configuring the virtual IP address [ID:5743]
 - fix: NTP Cluster Operation using 4-digit VLAN IDs did not work properly [ID:5880]
 - new: TSU-GbE: Support for Alternate Time Indicator TLV [ID:5408]
 - new: Improved SyncMon stability [ID:6117]
 - new: New notification: certifcate expiring warning [ID:6055]
 - new: Updated URL for leap second file from NIST [ID:5822]
 - new: Support for PIO180 [ID:5944]
 
Version 6.24.003: [2017-11-16]
 - fix: possible USB error while creation of diagfile [ID:6142]
 - fix: Allowing to mount storage devices during startup with /etc/mbg/fstab.add [ID:6126]
 - fix: possible stop of communication to PTP cards [ID:6011]
 - fix: possible internal restart of Lantimed while HPS hotplug event [ID:6084]
 - fix: Heartbeat trap did not use the correct privacy protocol with SNMPv3 [ID:5997]
 - fix: permissions problem with newly generated SSH hostkeys [ID:6109]
 
Version 6.24.002: [2017-10-25]
 - fix: Improved PTP clockClass handling for Telecom Phase/Time profiles [ID:5985]
 - new: Added new PTP profiles IEC 61850-9-3 and C37.238-2017 [ID:5980]
 - fix: fixed potential memory leak in SyncMon [ID:5976]
 - fix: fixed problems with detection of LNE/SFP [ID:5974]
 
Version 6.24.001: [2017-10-12]
 - Initial Release [ID:5954]


Close V6.24 Changelog

------------------------------------------

Version 6.22.006:   [2017-09-26]
 - fix: FIX: NTP Cluster Operation using 4-digit VLAN IDs did not work properly [5879]
 -      Optimized Cluster initialization on configuration change [5873]
 -      logrotate error logs of time monitoring [5881]
 - fix: fixed problems with ladvd and LNE cards [5703]
 - new: NTP in MRS with activ external NTP server will respond with corresponding stratum of external NTP serve [5827]
 - fix: Cluster did not send a gratuitous arp after configuring the virtual IP address [5742]
 - new: Made PTP clock_accuracy switching less sensitive to prevent Master changeovers [5571]
 - fix: home directory permissions incorrect [5717]
 - fix: support for MSF180 with MRS as first refclock [5817]
 - fix: Resend alarms fixed to send out all active correctly [5556]
 - new: FDM: refresh status fields automatically [5521]

Version 6.22.005:   [2017-08-09]
 - fix: fixed memory leak in config file monitoring [5673]
 -      added new NTP leapsecond file with new expiration date [5671]
 - fix: fixed problem when XMR show sync to OCXO for a short moment when ext.NTP will not be available any more and GPS is first priority [5669]

Version 6.22.004:   [2017-07-04]
 - new: Support SHA512 encryption for local user password [5533]

Version 6.22.003:   [2017-06-13]
 - fix: 'show network' CLI command did not correctly show all interfaces [5528]
 - fix: NTP interference with String+PPS reference source [5531]
 - fix: checkconfig CLI command did not cope well with orphaned locks [5515]
 -      no sudo syslog entries for usrmgr [5499]
 - new: PTPv1: Added time scale support [5509]
 - fix: fixed problem with detection of FDM511 in M300 with new IMS-CPU (do not check for special IMS devices while checking for serial devices) [5503]

Version 6.22.002:   [2017-05-23]
 - fix: TSU-GbE: Added cyclic check of time-of-day in PTP Master Mode [6912]
 - fix: CPE Time Zone settings not working correctly [5463]
 - fix: Heartbeat Traps did not work with SNMPv3 [5476]

Version 6.22.001:   [2017-05-17]
 - fix: added missing support for programmable pulses on front display for TCR180 [5472]




Close V6.22 Changelog

------------------------------------------

Version 6.20.023:   [2017-05-04]
 - fix: Fix: NTP Mon not working. [5420]
 - fix: fixed wrong Status of WWVB receiver in WEB interface on Main page [5429]

Version 6.20.022:   [2017-04-11]
 - new: support for TCR511 v1.12 [5398]

Version 6.20.021:   [2017-04-06]
 - new: NTP 4.2.8p10 fixing several security vulnerabilities [5382]
 - fix: fixed problem with blocking IP-tables rule in case of SpoofLocalTime in none IMS system [5349]

Version 6.20.020:   [2017-02-21]
 - fix: PTP Clock Accuracy in Holdover improved [5283]
 - fix: NTP PPS Initialization failed [5282]
 - fix: fixed Simulation Mode with TCR511 [5277]

Version 6.20.019:   [2017-02-14]
 - new: IEEE1588: New preset DOCSIS 3.1 supported [5235]
 - fix: Update to OpenSSH 7.4p1, OpenSSL 1.0.2k [5267]
 - fix: Receiver GRC181 not detected by SNMP [5217]
 - fix: added missing save configuration command on LCD2x40 in NTP Stratum menu [5225]
 - new: Introduced configurable Hold-Off and Wait-To-Restore timers for SSM-QL changeovers [4430]
 - fix: fixed problem with ntp.drift file when changing NTP configuration via WEB interface [5231]

Version 6.20.018:   [2017-01-31]
 - new: Updated NTP leapsecond file (expires Dec 28th 2017) [5202]
 - fix: TSU-GbE: Fixed behaviour if Offsets of greater one second have been measured in Slave mode [5198]
 - fix: fixed problem with SHS initialization when hidden parameter 'REVERSE CLK ORDER=YES' has been set [4793]
 -      stored network parameter for IPv4 address and Netmask as blank (empty string) if address is set 000.000.000.000 via front panel [5168]
 - fix: FDM receiver not addable [5174]
 - fix: fixed Version string on front display for PZF and TCR511/600 [5142]
 - fix: drawing graphs function in xtrastats web ui broken  [4872]
 - fix: Broken links in xtrastats web page [5150]
 - fix: changed the limit when NTP or PTP offset is >= 1.0s (formerly 0.9s) to activate a restart of NTP [5166]
 - fix: fixed problem when reading refclock status via SNMP (or socket) if refclock is not sync but antenna connected (if antenna connected then status will show sync also if no satellites available) [5158]

Version 6.20.017:   [2017-01-13]
 - fix: TSU-GbE: Use non-hybrid PTP mode as SMPTE Slave in case hybrid mode is not activated [5141]
 - fix: TSU-GbE: Fixed startup in NTP Server mode, avoid link flapping [5133]
 - fix: TSU-GbE: Fixed status update procedure in combined Unicast and Multicast PTP mode [5019]
 - fix: changed the notification output string in case of Redundant Power Supply without IMS (do not show the index of the power supply) [5117]
 - fix: Automatic download of leapsecond file from custom user-specified URL did not work [5068]
 - fix: SNMP sysDescr string not correct for most LANTIME models [5038]
 - fix: RADIUS options did not work if they contained a = char [5036]
 - fix: show process list not working in web interface [5097]
 - fix: CSR request: state field no longer mandatory [5047]

Version 6.20.016:   [2016-12-08]
 - fix: fixed problem when PTP is the only reference for MRS at startup [5030]
 -      SNMP write community not visible for info user group [5028]
 - fix: NTP time scale not changeable  [5022]
 - fix: fixed problem when adding an external NTP server while RDT is initializing [5017]

Version 6.20.015:   [2016-12-07]
 - fix: bogus config change notifications for ntp_leap_second file [5002]
 - fix: added leap second file for GPS ls_announcement [4999]
 - fix: fixed problem with disabled external NTP access when switching from SHS to Redundant mode while initialization [5011]
 - fix: fixed problem when adding an external NTP server on Syncfire while RDT is initializing [4922]
 - fix: fixed IRSA process for new OSC [4918]
 - fix: fixed problem if ntp.max_internal_offset parameter is set to 0 then enable external_ntp_access when NTP offset < 0.5s if enabled [4997]
 - fix: IMS logfiles will be created with M1000S and M3000S [4995]
 - fix: fixed problems with old PXA270v12 with Lantime version > 6.16 [4952]

Version 6.20.014:   [2016-11-22]
 - fix: MBG-SA1605 Fixes, see news.meinberg.de/384 [4942]
 - fix: OpenSSL 1.0.2j and OpenSSH 7.3p1 [4940]
 - fix: NTP 4.2.8p9 fixing several security vulnerabilities [4932]
 - fix: added new refclock menus for GNS [4892]
 - fix: fixed wrong reorganizing path for statistic files on flash (possible loss of configuration files on flash) [4924]

Version 6.20.013:   [2016-11-15]
 - fix: fixed problem when reading GNNS satellites for GALILEO [4882]
 - fix: fixed problem with recording reference data (no reference data available) [4878]

Version 6.20.012:   [2016-11-14]
 - fix: disabled check for internal NTP offset < 1ms before start monitoring [4800]
 - new: Support for CPE1002 (Capture) [4822]
 - fix: NTP service did not run correctly on SyncFire models with 32 CPU cores [4798]
 - fix: Improved Cluster state changes on SHS systems [4782]
 - fix: ensure that a factory reset via the CLI will not lock out root when  [4486]
 -      automatically set arp_ignore=1 for all interfaces [4831]
 - fix: PSU2 status on Syncfire was not correctly determined [4716]
 -      syslog ping check can be disabled [4701]
 - fix: fixed send-snmp-trap with long timeout if external snmp trap-receiver is not responding [4760]
 - fix: fixed SNMP get of mbgLtNgRefclockUsage with intergated RSC in M3000 [4807]

Version 6.20.011:   [2016-10-20]
 - fix: Fixed automatic leap second file download [4413]
 - new: Support for Galileo and GRC181 clock module [4713]
 -      Increased Password Length of 64 chars [4597]
 - fix: IPv6 addresses not accepted as external NTP server address [4596]
 - new: Changes in the hostname did not trigger a restart of the SNMP agent, failing to pick up the changed name [4538]
 - fix: DHCP provided gateway was not removed when switching back to static config [4575]
 - fix: ROOT_CA bundle fixed, preventing autoupdate to work correctly [4499]
 - fix: fixed problem with setting IP address with possible one more digit on 4-line-displays [4583]

Version 6.20.010:   [2016-09-01]
 - fix: Routing for VLAN did not work correctly [4507]
 - fix: [FIX] Serial FDM parameters have always been set to BAUD 4800 [4564]
 - fix: fixed wrong front display of SV info with BEIDOU only mode [4551]

Version 6.20.009:   [2016-08-04]
 - fix: added support for 40GBit and 100GBit network controller [4481]
 - new: support for GRC181 [4482]
 - fix: disabled sending notification 'CLK1 not sync' in case of Syncfire [4480]
 - fix: fixed problem when loading user configuration in RDT system [4477]
 - fix: fixed setting IP address via front panel (cutting last digit in case of ip-addres has full length) [4465]
 - fix: TSU-GbE: Improved PTP Slave accuracy when using 2-step TCs [4474]
 - new: notice to messages if NTP stratum value changed [4460]
 - fix: fixed problem that RSC switch to Clk1 always [4447]
 - fix: fixed sending antenna faulty notification if delay time has not been finished (for PZF, DCF, WWVB) [4453]
 - fix: additional check on second serial refclock for time string at boot time if first refclock is not available [4380]
 - fix: increased size of message buffer for PTP notification messages [4454]
 - fix: added announce time at leapsecond notification [4457]
 - fix: renamed /tcr_info file to /ref_info [4452]
 - fix: fixed restart of NTP when changing TCR UTC Offset via front panel [4455]

Version 6.20.008:   [2016-07-13]
 - fix: fixed cyclic message every 2 seconds in messages file if status of HPS100 is available [4434]
 - fix: configure ptp client monitoring via front panel possible [4405]
 - fix: fixed support for old LCD displays with CPC version < 104 [4409]

Version 6.20.007:   [2016-07-12]
 - fix: restart SNMPD after finishing initialization [4407]
 - fix: show CLK1 and CLK2 in syslog messages (instead of CLK[0] and CLK[1]) [4404]
 - fix: do not fall back clock accuracy if xmulti instances not set [4397]
 - fix: fixed RDT could not read Std Meinberg String with 19200/8N1 at startup [4395]

Version 6.20.006:   [2016-07-04]
 - fix: Optimized Clock Module Detection, failed sometimes with GPS180/PZF180 during system start [4394]

Version 6.20.005:   [2016-06-30]
 - new: OpenSSH Version 7.1p2 [4387]
 - new: [SyncFire] Kernel 4.4.13 [4386]
 - new: NTP 4.2.8p8 [4384]
 - new: PTP: Clock Class and Clock Accuracy values are better calculated depending on the reflcock state [4385]
 - fix: Fix for Security Vulnerabilities as described in MBGSA-1604 [4383]
 - fix: TSU-GbE: Additional consistency checks when checking the reference time in Master Mode to avoid time steps [4363]
 - fix: fixed problem with USB-Stick menu confirming menu with ok [4350]

Version 6.20.004:   [2016-06-14]
 - fix: removed debug messages in /var/log/smpte.log [4344]
 - fix: fixed missing MRS input references on Clock page in WEB interface [4343]

Version 6.20.003:   [2016-06-10]
 - fix: web security improved [4334]
 - fix: TCR180 fixed wrong version string on front display [4316]

Version 6.20.002:   [2016-06-06]
 - fix: bugfix in sending mails to multiple receivers [4297]
 - fix: TSU-GbE: In Master mode, the time could step in very rare occasions after an errornous time read. Additional consistency checks have been added. [4323]
 - fix: Lantime management service could stop after Cluster reconfiguration [3776]
 - new: Added auto-toggle feature for FDM displays [4191]
 - fix: Serial FDM (FDM509/FDM511) detection stabilized [4306]

Version 6.20.001:   [2016-05-23]




Close V6.20 Changelog

------------------------------------------

Version 6.19.005:   [2016-05-23]
 - new: NTP Version 4.2.8p7 [4249]
 - new: a notification will be sent if a configurable limit to internal NTP offset has been exceeded [4259]

Version 6.19.004:   [2016-05-02]
 - new: Support for HPS100 [4254]
 - new: Beidou support via SNMP [4173]
 - fix: in case of refclock not responding do a rescan of all refclocks [4244]
 - new: Support for TCR180 [3825]
 - new: Support extended features for ref sources [3980]

Version 6.19.003:   [2016-04-19]
 - fix: added  [4227]
 - fix: save MAC addresses in net.cfg with lower case to avoid configuration changes after reboot [4226]

Version 6.19.002:   [2016-04-18]
 - fix: fixed buffer overflow when sending Notifications with big additional Infos (> 100 chars) [4201]
 - fix: Expired HTTPS certificate wrongly reported. [4150]

Version 6.19.001:   [2016-03-04]
 - fix: 	MRS and ESI Stats Files removed after 3 days to preserve space [3757]
 - new: OpenSSL 1.0.2f [4092]
 - new: Added support for receivers that offer BEIDOU reception [3365]
 - new: TSU: Prevent to start mbgctrl daemon if already started [3792]
 - fix: TSU-GbE: Phy Delays recalibrated [3794]
 - fix: TSU-GbE: IPv6 address had not been set correctly if the long form was used (including zeros) [3939]
 - fix: PTP Offset calculation could be wrong if Offset was measured to be greater than 1 second [3937]
 - fix: fixed possible read of empty PTP grandmaster ID or other PTP status [4084]
 - fix: in case of M1000 and M1000S Power Supply Slots has been changed: PWR1=lowerSlot PWR2=upperSlot [4080]
 - new: in case of M1000 and M1000S Fan Module will be switched on permanently [4077]
 - fix: fixed no notification 'Antenna faulty' in case of GPS without MRS [4074]
 - fix: fixed status of Referenz-LED (green) in case of two receivers in simulation mode [3996]
 - fix: fixed problem with 'restrict NTP access while init' when changing SHS mode [4073]
 - fix: fixed support for NMEA with PPS in RDT (added comments for ATOM PPS support in ntp.conf) [4071]
 - new: MRS Support for XMR statistic, auto bias and asymetry step detection added [3364]
 - new: Support For IMS VSG cards added [3158]
 - new: Support for trustedkeyrange added.  [3973]
 - fix: fixed send-mail with long timeout if external email smarthost is not responding [4045]
 - fix: Flag shown in the header doesn't matched language settings [3982]
 - fix: Sporadic broken list of supported IRIG codes fixed [4036]
 - fix: Loading SSH default config resulted in not being able to login via SSH again [3824]
 - fix: restarting ssh from within an ssh session resulted in ssh daemon being stopped [3821]
 - fix: NTP service jas not been restarted when symmetric keys have been modified [3782]
 - fix: generating ssh host keys did not work  [3735]
 - fix: Automatically create aliases for internal TSU IP addresses to avoid reverse lookups [3893]
 - fix: DHCP search domains are correctly handled [3949]
 - fix: nicmgr autoassign now assigns new interfaces in MAC address order [3962]
 - new: NTP Version 4.2.8p6 [3969]
 - new: New NTP leap second file from IERS included, expires Dec 28, 2016 [3972]
 - fix: SNMP now correctly uses community strings [3987]
 - fix: Hostnames received via DHCP can now be used instead of the static configuration [3998]
 - new: CPU Serial Number recognized during startup [3420]
 - add: First LED on CPU Module stays blue until fully initialized [3959]
 - fix: Stability Fixes for IMS Series systems [3799]
 - fix: fixed problem with 'delay notification for PZF not sync' if PZF is second refclock [3879]
 - fix: fixed Network state won�t be updated if Lantime has no reference clock (in case of RDT only) [3872]
 - new: added support for IMS cards REL and SPT [3832]
 -      set default value for "Delay PZF not Sync Message" to 900 [3767]
 - new: renamed front panel menu from 'Restart Linux' to 'Restart System' [3788]
 - fix: fixed problem when selecting MRS Master with simulation mode [3786]
 - fix: fixed problem when hotplug IMS cards [3784]
 - fix: set RTC of CPU if set system time [3363]
 - fix: fixed problem detecting time of reference clock after restart [3750]
 - fix: fixed sporadically restarts of PTP mbgctrl [3640]
 - fix: TSU-PXA: Check time difference to LAN-CPU every second and set time of TSU is case of diff > 0.9s [3166]
 - fix: set state of XMR to sync if synchronized to one external reference (also if GPS has antenna faulty) [3481]
 - fix: fixed NTPD memory problem with additional line in ntp.conf 'rlimit memlock 0' [3455]
 - fix: fixed sending IMS Error Notification when Fan Temperature Limit exceeded - now IMS Error will be send at 71 C� [3453]
 - new: in case of XMR send notifications for changes in antenna status only if refclock (GPS,PZF,GLN) is in list of XMR priorities [3498]
 - new: now show type of GPIO in XMR status information (xmr_info) [3502]
 - fix: fixed problem when detecting external display after reboot (missed keys function on M100 and NTP-CPU) [3533]
 - fix: fixed wrong SSM info at GPIO types other than type BITSin [3500]
 - new: fixed timescale arbitrary in Master mode in case of PXA270vXX [3293]
 - fix: fixed problem when changing NTP parameters while startup of RDT without serial refclock [3616]
 - fix: fixed Link state in bonding mode [3775]
 - fix: fixed TCR did not send notification when refclock is sync [3779]
 - fix: USB restore fixed [3225]
 - fix: Routing for Cluster IP addresses did not always work [3335]
 - fix: IPv6 addresses malformed in configuration [3183]
 - fix: NTP Version 4.2.8p4 [3707]
 - fix: Interface specific gateway setup did not work in all cases [3720]
 - fix: VLAN interface removal did not work without a reboot in some cases [3722]
 - fix: automatic import of configuration from 6.14 did not work for external authentication [3726]
 - new: tcpdump updated to 4.7.4 [3724]
 - new: OpenSSH Version 7.1p1 [3711]
 - new: OpenSSL 1.0.2d [3713]
 - fix: glibc: Fixed CVE-2015-1781 [3672]
 - fix: RADIUS authentication did not work when mbg-priv-level was not the first VSA [3497]
 - fix: CLI one-file config/restore functionality did not work correctly with files without CR/LF at EOF [3216]
 - new: added 'Back' button on main page of NTP-Monitoring [3313]
 - add: renamed display setup menu from 'Restart' to 'Options' [3433]
 - fix: fixed enterprise value for SNMP V1 traps [3558]
 - fix: fixed problem if removed all external NTP server in MRS then set status of external NTP server to "not available" [3300]
 - fix: SNMP Trap logging did not work for "Device Config Changed" traps [3214]
 - fix: fixed bug when speacial feature 'NTP spoof local time' do stop NTP without restart if no daylight saving is set [3106]
 - fix: fixed problem to detect if serial time string of refclocks are switched via RSC or not [3117]
 - fix: fixed notification XMR_LIMIT_EXCEED send one time only [3115]
 - fix: fixed displaying 0.0C in status also if no sensor is connected (with refclock GRC) [3144]
 - fix: fixed displaying wrong PTP mode when configuring PTP configuration via front panel [3150]
 - fix: fixed network LED did not switch to red if one of the monitored network ports has no link [3153]
 - fix: PTP configuration sent to TSU correctly after activating saved config set [3186]
 - fix: fixed multiple starts of receive thread when changing NTP-Mon configuration [3113]
 - fix: fixed problem where 'PTP State Changed' notification messages for snmp, email and others logged only once in lantime_message file [3190]
 - fix: if MRS reference signal is not available then write '???' as value to mrs_stats file (instead of last meassured value) [3206]
 - fix: replaced all messages in syslog and notifications from 'Refclock' to CLK1 and CLK2 [3080]
 - new: Send clearing trap for FDM Error (FDM OK) [3134]
 - fix: fixed wrong display output when pressing F1 on M3000 with 2 refclocks [3077]




Close V6.19 Changelog

------------------------------------------

Version 6.18.018:   [2016-05-20]
 - fix: DHCP provided gateway was not used as standard default GW  [4272]

Version 6.18.017:   [2016-05-18]
 - fix: Interface specific gateway route was not correctly created for VLAN interfaces [4216]
 -      OpenSSL 1.0.2h [4257]

Version 6.18.016:   [2016-04-28]
 - new: NTP 4.2.8p7 - see http://nwtime.org/ntf-releases-ntp-4-2-8p7-security-patch/ [4248]
 - fix: fixed buffer overflow when sending Notifications with big additional Infos (> 100 chars) [4200]

Version 6.18.015:   [2016-03-22]
 - fix: SNMP agent responded to V1/V2c queries even when "V3 only" mode has been selected [4175]
 - fix: NTP symmtric key: High index values supported now [4161]
 - fix: fixed problem that MRS parameter are reseted or changed when updating firmware [4106]
 - fix: Expired HTTPS certificate wrongly reported. [4149]
 - fix: fixed switching RSC to redundant clock if it is available but not locked and accurate [4140]
 - fix: fixed SNMP Output which displayed wrong number of satellites in view in case of GLN Receiver [4110]
 - fix: SSM QL adjustment: Use QL-SSU-A as holdover degradation value if QL-PRC was active before. This is also used for the clock_class mapping in PTP profile G.8265.1 [4095]
 - new: OpenSSL 1.0.2g [4091]
 - fix: SyncFire NTP responses could be generated with wrong source IP address [4089]
 - fix: Fixed problem with cluster mode and bonding. Multicast messages from own host could not be detected [4064]
 - fix: SNMP service status was not correctly determined and shown in WebUI [4085]
 - fix: Xtrastats CPU utilization graph did not work [4061]
 -      setup CLI command prints an explanation that it has been replaced in V6 [4033]
 - fix: fixed possible read of empty PTP grandmaster ID or other PTP status [4083]
 - fix: in case of M1000 and M1000S Power Supply Slots has been changed: PWR1=lowerSlot PWR2=upperSlot [4079]
 - new: in case of M1000 and M1000S Fan Module will be switched on permanently [4076]
 - fix: fixed display wrong Gateway in case of DHCP [4068]
 - fix: fixed status of Referenz-LED (green) in case of two receivers in simulation mode [4039]
 - fix: fixed problem with 'restrict NTP access while init' when changing SHS mode [4057]
 - fix: fixed no notification 'Antenna faulty' in case of GPS without MRS [4060]
 - fix: fixed send-mail with long timeout if external email smarthost is not responding [4044]

Version 6.18.014:   [2016-02-03]
 - fix: Sporadic broken list of supported IRIG codes fixed [4035]
 - fix: Gigabit Ethernet Interfaces did not work after upgrading to 6.18.010-013 [4001]
 - fix: SyncFire 10GE Interfaces did not work in 6.18.010-013 [4027]
 - fix: fixed wrong email with system reboot message [3983]
 - fix: SNMP now correctly uses community strings [3986]
 - add: First LED on CPU Module stays blue until fully initialized [3958]

Version 6.18.013:   [2016-01-14]
 - new: New NTP leap second file from IERS included, expires Dec 28, 2016 [3971]
 - new: NTP Version 4.2.8p5 [3968]
 - fix: Status LED of CPU module now stays blue until CPU is fully initialized [3965]
 - fix: Assigning physical network interface names in wrong sort order [3961]
 - fix: DHCP search domains are correctly handled [3948]
 - fix: Downloads for NTP Leap Second files and Firmware Updates now support HTTPS [3951]
 - res: TSU-GbE: Phy delays recalibrated [3942]
 - fix: TSU-GbE: IPv6 addresses were not set if the long format (including Zeros) was used [3938]
 - fix: TSU-GbE: In Slave mode, PTP offset could have the wrong sign if initial offset was greater than 1 second [3936]
 - fix: Avoid reverse DNS lookups for internal IP addresses [3892]
 - fix: fixed problem with 'delay notification for PZF not sync' if PZF is second refclock [3878]
 - fix: fixed Network state won't be updated if Lantime has no reference clock (in case of RDT only) [3871]

Version 6.18.012:   [2015-12-22]
 - fix: new NTP leapsecond file expires in June 2016 [3869]
 - fix: NTP with nanosecond resolution [3867]

Version 6.18.011:   [2015-12-22]
 - fix: fixed:  if 'spoof local time' is enabled then no external NTP access is possible [3850]
 - fix: added support for TCR511 with M400 and M900 [3840]
 - new: SMTP email client can now use FQDN if required by mailserver [3810]
 - fix: SSH host key configuration tried to referenced an outdated key [3740]
 - fix: NTP Groupkey generation did not work [3807]
 - fix: Bonding mode changes did not work until next reboot [3675]
 - fix: NTP Access Counter counted local status queries [3645]
 - fix: Configured shell timeout not applied correctly [3818]
 - fix: restarting ssh from within an ssh session resulted in ssh daemon being stopped [3820]
 - fix: fixed possible overwriting of other configuration parameters when reading configuration for notification [3814]
 - fix: in case of GPS or GRC will become sync then set time on all TSUs once [3812]

Version 6.18.010:   [2015-11-26]
 - fix: Stability Fixes for IMS Series systems [3798]
 - fix: NTP service jas not been restarted when symmetric keys have been modified [3781]
 - fix: TSU-GbE: Prevent short link down events in autoneg mode [3793]
 - new: TSU: Prevent to start mbgctrl daemon if already started [3791]
 - fix: updated Kernel 3.7.1 to 4.2.5 [3770]
 - fix: Unicast Slave mode did not work correctly [3789]
 - new: renamed front panel menu from 'Restart Linux' to 'Restart System' [3787]
 - fix: fixed problem when selecting MRS Master with simulation mode [3785]
 - fix: fixed problem when hotplug IMS cards [3783]
 - fix: fixed Link state in bonding mode [3774]
 - fix: fixed TCR did not send notification when refclock is sync [3778]
 - add: usrmgr now accepts correct access level ids super, admin and guest [3742]

Version 6.18.009:   [2015-11-13]
 - fix: MRS and ESI Stats Files removed after 3 days to preserve space [3756]
 - fix: fixed problem detecting time of reference clock after restart [3749]

Version 6.18.008:   [2015-11-03]
 - fix: generating ssh host keys did not work  [3734]
 - fix: Dropped packets when accessing the NTP server with more than 128k single IP addresses on SyncFire [3732]
 - fix: ntpconf.add was not correctly imported from versions 6.10-6.16 when updating to 6.18 [3727]
 - fix: IPv6 addresses malformed in configuration when ending in :0 [3731]
 -      nicmgr autoassign now assigns new interfaces in MAC address order [3717]
 - fix: fixed problem when changing NTP parameters while startup of system with async Refclock and setting enable serial output to 'if sync' [3610]
 - fix: fixed problem with NMEA: all parameters will be set as comment in ntp.conf - the user has to be set these parameters manually [3714]
 - fix: fixed problem when changing NTP parameters while startup of RDT without serial refclock [3615]

Version 6.18.007:   [2015-10-26]
 - fix: RADIUS and TACACS config lost after update from 6.14.x or earlier [3725]
 - new: tcpdump updated to 4.7.4 [3723]
 - fix: VLAN interface removal did not work without a reboot in some cases [3721]
 - fix: Interface specific gateway setup did not work in all cases [3719]
 - new: OpenSSL 1.0.2d [3712]
 - new: OpenSSH Version 7.1p1 [3710]
 - fix: NTP Version 4.2.8p4 fixing multiple security vulnerabilities [3706]
 - fix: Power supply status fixed on notification matrix [3665]
 - fix: glibc: Fixed CVE-2015-1781 [3671]
 - new: support for old FDM509 [3656]
 - fix: RADIUS authentication did not work when mbg-priv-level was not the first VSA [3496]

Version 6.18.006:   [2015-09-29]
 - fix: Net link status shown correctly on notification page of web interface [3641]
 - fix: fixed sporadically restarts of PTP mbgctrl [3639]
 - fix: Bonding did not work properly [3636]
 - fix: fixed wrong keypad lock file on USB stick [3617]
 - fix: USB restore fixed [3613]

Version 6.18.005:   [2015-09-21]
 - fix: fixed enterprise value for SNMP V1 Traps [3557]
 - fix: fixed problem when detecting external display after reboot (missed keys function on M100 and NTP-CPU) [3532]
 - new: fixed timescale arbitrary in Master mode in case of PXA270vXX [3292]
 - new: in case of XMR send notifications for changes in antenna status only if refclock (GPS,PZF,GLN) is in list of XMR priorities [3494]
 - fix: restore_config_backup did not correctory restore files not ending with CR/LF [3215]
 - new: now show type of GPIO in XMR status information (xmr_info) [3501]
 - fix: fixed wrong SSM info at GPIO types other than type BITSin [3499]
 - fix: set state of XMR to sync if synchronized to one external reference (also if GPS has antenna faulty) [3480]
 - fix: fixed NTPD memory problem with additional line in ntp.conf 'rlimit memlock 0' [3454]
 - fix: fixed sending IMS Error Notification when Fan Temperature Limit exceeded - now IMS Error will be send at 71 Grad [3452]
 - fix: fixed wrong status and field with old PZF509 and PZF511 [3451]
 - new: added 'Back' button on main page of NTP-Monitoring [3312]
 - add: renamed display setup menu from 'Restart' to 'Options' [3432]
 - fix: fixed show wrong display menu when inserting USB-Stick at first time after reboot [3434]
 -      use delay for PZF not sync message for Antenna faulty too [3354]
 - fix: Routing for Cluster IP addresses did not always work  [3334]

Version 6.18.004:   [2015-08-14]
 - fix: DSCP Class for NTP not applied on SyncFire 1000 [3372]
 - fix: set RTC of CPU if set system time [3362]
 - fix: Added support for setting the RTC on the CPU board [3360]
 - new: Include Satellite Visibility Bitmap in diag file [3358]
 - fix: Fixed SNMP requests for PTP cards [3351]
 - new: TSU-GbE: New PTP Stack Version handles problem with datasets update [3348]
 - fix: Notification (Cluster Master Changed ) not sent correctly  [3228]
 - fix: Fixed setting MRS status for NTP to "not available" if all external NTP servers are removed [3299]
 - fix: TSU-PXA: Check time difference to LAN-CPU every second and set time of TSU is case of diff > 0.9s [3165]
 - fix: Fixed problem when adding a new member to the NTP-Monitor list, then offset values of exsisting members rapidly increase [3147]
 - fix: If MRS reference signal is not available then write '???' as value to mrs_stats file (instead of last measured value) [3205]

Version 6.18.003:   [2015-07-07]
 - fix: SNMP Trap logging did not work for "Device Config Changed" traps [3213]
 - fix: PTP and other configuration parameters weren't loaded after restore or discard operations [3211]
 - fix: fixed problem where 'PTP State Changed' notification messages for snmp, email and others logged only once in lantime_message file [3189]
 - fix: NTP is not stopped anymore when it has been disabled on all interfaces [3187]
 - fix: Fix broken ipv6 config after update [3182]
 - fix: Check added to prevent empty syslog-ng config [3110]
 - fix: PTP configuration sent to TSU correctly after activating saved config set [3185]
 - new: new parameter nas-ip supported for external authentication [3178]
 - fix: Additional network config file not editable over web interface [3167]

Version 6.18.002:   [2015-06-22]
 - fix: CPE tabs not closing correctly [3154]
 - fix: fixed network LED did not switch to red if one of the monitored network ports has no link [3152]

Version 6.18.001:   [2015-06-18]
 - fix: fixed displaying wrong PTP mode when configuring PTP configuration via front panel [3149]
 - fix: fixed displaying 0.0C in status also if no sensor is connected (with refclock GRC) [3143]
 - new: support add_info_text for external notifications [3141]
 - fix: Support for PZF/MSF [3099]
 - new: Cluster members can now optionally can communicate via Unicast Messages [3126]
 - new: FDM supports switching web relays [3135]
 - new: Send clearing trap for FDM Error (FDM OK) [3098]
 - fix: Fixed Cluster behavior after bonding failover [3128]
 - fix: fixed problem to detect if serial time string of refclocks are switched via RSC or not [3116]
 - fix: fixed notification XMR_LIMIT_EXCEED send one time only [3114]
 - fix: fixed multiple starts of receive thread when changing NTP-Mon configuration [3112]
 - fix: fixed bug when speacial feature 'NTP spoof local time' do stop NTP without restart if no daylight saving is set [3105]
 - fix: replaced all messages in syslog and notifications from 'Refclock' to CLK1 and CLK2 [3079]
 - fix: fixed wrong display output when pressing F1 on M3000 with 2 refclocks [3076]




Close V6.18 Changelog

------------------------------------------

Version 6.17.008:   [2015-05-21]
 - fix: reboot via SSH command did not always succeed [3060]
 - fix: fixed M300 2x40 LCD display show status PASSIV for all modes in programmable pulses menu [3059]
 - fix: new hidden parameter to set the reverse order of reference clocks in NTP configuration [3052]

Version 6.17.007:   [2015-05-07]
 - fix: fixed do not add leapsecond file to NTP config in case of GPS-Timescale is not UTC (e.g. TAI or GPS) [3048]
 - fix: Fixed NTP Spoof Local Time [3047]
 - new: add differences between refclocks to first mrs_stats0  [3034]
 - fix: fixed problem when detecting display (CPC device) [3033]
 - fix: fixed problem with notification 'refclock not responding' with two refclocks [3032]
 - fix: fixed wrong sign in display the XMR PTP and NTP offset (WEB, front panel and log-files) [3017]
 - fix: fixed if found RSC then set time of both receiver at the same time [3016]
 - fix: fixed if RSC switched to different clock then NTP Slave send wrong seconds offset to MRS [3015]
 - fix: Display GM UUID of active GM in passive mode [3014]
 - fix: fixed 'PTP ERROR' notifications will be send only once [3012]
 - fix: Textfile content ontaining a % char displayed correctly [3010]
 - fix: fixed problem when setting time on front panel (could not change value for hours or days) [3003]
 - fix: fixed PZF180 red LED in Simulation mode [3001]
 - new: added MRS/XMR support for PZF180 [3000]
 - fix: empty hostname did not correctly reset hostname [2957]
 - fix: deactivated services started at every configuration reload [2961]
 - fix: TSU-Gbe: P2P mode did not work correctly, as PDelayReq Timeouts were misconfigured [2987]
 - fix: TSU-GbE: PTP in IPv6 mode now starts even if no IPv4 address is configured [2808]
 - fix: fxed wrong number of good svs via SNMP request [2986]
 - fix: Updated OpenSSL to 0.9.8zf: Fixes CVE-2015-0209, CVE-2015-0286, CVE-2015-0287, CVE-2015-0288, CVE-2015-0289, CVE-2015-0293 [2954]
 - fix: Manual edititng of config files fixed [2934]
 - fix: fixed set time of new PZF180 via front panel [2984]
 - fix: fixed unlocking front panel key-pad-lock via USB Stick [2963]
 - fix: MRS support for PZF and GLN added [2171]
 - fix: PTP statistic not downloadable [2980]
 - fix: fixed if RSC switched to different clock then PTP Slave on TSU use wrong seconds offset [2665]
 - fix: fixed: XMR limit not detected if the order of priorities is not the default order [2944]
 - new: new IMS notifications IMS_ERROR (IMS Module removed or CPU temperature > limit) and IMS_OK (IMS Module added or CPU temperature < limit) [1216]
 - new: show CPU temperature in C and F on front display [2936]
 - new: when the receiver is in simulation mode, a star symbol was missing in the time diplay of M600 [2832]
 -      fixed different display menus for serial output of GPS and GLN [1354]
 - fix: fixed wrong count of good GPS SVs in case of mixed mode GPS/GLONASS on front display and logfiles [2846]
 - new: support for multiple USB displays [2910]

Version 6.17.006:   [2015-03-16]
 - new: PTP Layer2 mode now possible without IPv4 address configured on PTP interface [2915]
 - fix: Delayed restart of esync tool prevents starting two instances of the process [2914]
 - fix: NTP Access Restriction fixed [2900]
 - fix: Value of SNMP V3 user rights not shown correctly in web interface [2876]
 - fix: fixed problems with FDM and GPS if FDM found as first device [2897]
 - fix: fixed problem when found RSC and no second refclock present (repeated reboot) [2890]
 - fix: Update (backported) glibc to fix CVE-2014-9402 (glibc infinite loop) [2879]
 - fix: Updated libc function'__nss_hostname_digits_dots to fix CVE-2015-0235 (GHOST) [2878]
 - fix: Syslog server removed wrongly when saving network page [2831]
 - new: Plausibility for NTP symteric keys fixed [2402]
 - new: Trustime configurable separately for every refclock [2734]
 - fix: if PZF Mode is 'Searching' and 'sync' then Mode is 'AM Operation' [2694]

Version 6.17.005:   [2015-01-16]
 - fix: OpenSSL Version 0.9.8ze, fixing several vulnerabilities [2661]
 - fix: Ensure proper link speed setting for SFP port on GBit TSU [2659]
 - new: add leapsecond date to leapsecond notification [2654]
 - fix: fixed set time of second refclock if type is PZF/TCR [2653]
 - new: if set time of one refclock then set the same time to second refclock if available [2652]
 - fix: Fixed missing TX packet counter for PTP interface on TSU-GbE [2651]
 - new: Added Leap Second information for leap second at end of June, 30th 2015 [2650]
 - new: Set initial time for all refclocks implemented  [2649]
 - fix: buttons wrongly enabled in firmware management fixed. [2457]
 - fix: if found SF10xx without internal refclock then disable serial reference [2589]
 - fix: too many syslog entries due to unnecessary AVAHI service (re)starts [2586]
 - fix: Fixes for multiple NTP Vulnerabilites - see MSA1405  [2585]
 - fix: fixed disable IPv4 address if VLAN enabled on non VLAN interface [2496]
 - new: increased maximum number of Prog-Pulses to 4 [2495]
 - new: support remote syslog servers with IPv6 addresses [2584]
 - new: New notification added: SHSTimeLimitOK [2240]
 - new: Time zone support for CPE card added [828]
 - new: Status of front panel leds visible via web interface  [709]
 - fix: Cutted build information and images in Internet Explorer fixed [1428]
 - fix: User defined notification were not sent correctly [2475]
 - fix: All ESI fields wrongly enabled when additional LIU card is present. [2462]
 - fix: fixed if no leapsecond announced then do not show leapsecond date in log and status files [2456]
 - fix: made connect call non-blocking when FDM displays are unreachable [2581]
 - fix: fixed wrong PTP clock_class in case of MRS sync to internal oscillator [2450]
 - fix: fixed different status of second refclock if it is MRS [2448]
 - new: added support for NMEA ZDA string for serial input in RDT system [1320]
 - fix: Empty user in user list fixed. [2441]
 - new: Added Lucky Packet Filter and basic Median Filter for PTP Slave [2437]
 - fix: fixed display errors on serial port configuration for DCF,WWVB and MSF [2578]
 - new: Support RDT in Syncfire without reference clock [2428]
 - fix: fixed problem with MSF, WWVB, JJY, DCF receiver log error message "not sync" and 5 seconds later "sync" again - every 10 minutes [2269]
 - fix: PPS initialization routine for NTP improved [2577]
 - fix: PTP Slave can now use MAC Adresses as Unicast grantors [2231]
 - fix: TSU-GbE: Set BMCA parameters for G.8275.1 correctly [2230]
 - new: Support configurable IPv6 Multicast Scope [2229]
 - fix: Adjusted PHY delays for FPGA versions starting from 405 [2228]
 - fix: set NTP refid to WWVB, MSF or JJY if appropriate refclock has been found [2573]
 - fix: Remote Accounts were not correctly created for TACACS and RADIUS access [2572]
 - new: remove passwords and other security relevant information from diag_file [2570]
 - new: Confguration import from V5 and V6.14 now correctly imports most settings  [2569]
 - fix: TACACS login to CLI now works for superuser accounts [2567]
 - fix: Websession authentication problems fixed [2566]
 - fix: Nameserver and Syslogserver can get lost after saving configuration [2565]
 - fix: removed default routes for IPv6 linklocal interfaces [2564]
 - fix: serial console baudrate is now 38400 only [2563]
 - new: Added Gateway rules for CLuster IPs [2562]
 - fix: network interface order preserved at all times [2561]
 - fix: if NTP stopped due to SHS time limit error then stop checking SHS time limits [2560]
 - new: added notification messages for NTP Monitoring [1378]
 - new: added new button to remove all logfiles [1377]
 - fix: fixed if no data available for graphic then display "no data available" [1374]
 - new: added display for error messages structured by NTP servers [1373]
 - new: changed order in time of Global Error Log file -> now latest message on top [1369]
 - fix: no prog pulses and serial ports visible anymore on M200 [2558]
 - fix: fixed error messages "not sync" - "sync" within 10s with MRS receiver [2556]
 - fix: added 'System Info' menu in M300 system menu to be compatible with other display types [2633]
 - new: added display menu to set system time [2555]
 - new: Support RDT in Syncfire without reference clock [2554]
 - fix: fixed limited MRS holdover time on display (<256h) [2550]
 - new: Syncfire: if found no refclock then reboot after 3min [2547]
 - fix: fixed wrong message on display if changes NTP configuration after restart via WEB interface [1380]

Version 6.17.004:   [2014-09-18]
 - fix: if no suitible refclock found in Syncfire then show on display and reboot after 3min [1409]
 - fix: handle antenna faulty detection in case of PZF [1404]
 - fix: fixed: could not set enable flags for PZF,MSF and WWVB [1411]
 - fix: activated error relais for PZF, MSF, WWVB [1405]
 - new: support XMULTI_REF_INFO_IDX structure via socket command [1417]
 - new: support XMULTI_REF_STATUS_IDX structure via socket command [1416]
 - fix: show status on display when checking possible TSU at startup [1415]
 - fix: initialize MRS Priorities with default values if empty [1412]
 - fix: fixed wrong display menu in PTP settings (Delay Mech. and Protocol type in Slave Mode) [1421]
 - fix: Feature StrTypeInfo and SimulationMode supported [1422]
 - fix: fixed security problem when add or delete user [1424]
 - fix: SNMP refclock status: if refclock is MRS then return current MRS refclock in REF_SUBSTATE [1423]
 - new: write temperatures of IMS cards to /var/log/temperatures.20140723 (set NOTIFICATIONS:temperature in /flash/data/global_option) [1460]
 - fix: show status of power supplies in IMS Info on display [1459]
 - new: set LEDs on IMS CPU module with external command ftdiled [1461]
 - new: show tempearture on display for each IMS Slot card [1462]
 - fix: if power supply change the status then the correct number of PSU will be printed in notification and logfiles [1471]
 - new: added show-devices to /device_version [1470]
 - fix: lt_set_systime return wrong status [1469]
 - fix: lt_set_systime fixed problems with second refclock [1468]
 - fix: changed the Presets text on front panel display to End-to-End Default Profile [1473]
 - fix: fixed reading wrong version number of second reference clock (in module lt_set_systime) [1477]
 - new: added external NTP Monitoring tool to lantime project [1476]
 - fix: added NTP Monitoring WEB CGI to lantime project [1475]
 - fix: modify old function program_with_pid_is_running() to service_is_running() [1474]
 - fix: printed version of FDM to /device_version if FDM has been found [1481]
 - fix: if MRS sync to IRIG then set the PTP accuracy to 10us (former set to unknown) [1482]
 - new: NTP Client Monitoring mit Logging [1210]

Version 6.17.003:   [2014-05-09]
 - new: Preliminary support for new NTP Client Management [2177]
 - new: Timecode and Synthesizer support for CPE prog pulses added. [2179]
 - new: SCG support added [2180]
 - fix: PTP one step and layer 3: wrong behaviour of selectbox fixed. [2178]
 - fix: improved reading the CPU temperature [2185]
 - fix: improved detecting serial refclocks at startup [2184]
 - new: automatic detection of new power supplies [2183]
 - new: support for ProgPulses with Synthesizer and TimeSlot on front panel display added [2182]
 - fix: fixed problems with wrong Mode for ProgOutputs (have to check for supported modes) [2181]

Version 6.17.002:   [2014-04-08]
 - fix: fixed NTPD leapsecond handling in case of serial refclock with PPS support [2174]
 - fix: PTP status of second refclock has not been reseted if PTP card not synchronized as PTP-Slave [1266]
 - new: new system tool to set system time with possible refclocks at boottime before starting services [2173]

Version 6.17.001:   [2014-03-24]
 - new: IRSA with RSC: set disable remote at startup [2206]
 - fix: when user activate Cold-Boot manually then send configuration to refclock again [2200]
 - new: IRSA with RSC: if only one time sync signal is set then the RSC will set the refclocks automatically => then do not send remote switch over [2205]
 - new: IRSA with RSC: if precisions not equal check isAccurate and isSettled [2204]
 - fix: adaption of status file /xmr_info for RSC [2203]
 - new: IRSA with RSC: if one precision==0 then the other clock win the game [2202]
 - new: IRSA with RSC: if time difference between Ref1 and Ref2 > 1s then do not use precision for decision [2201]
 - fix: if SHS not activated then never trigger shs_time_limit_error [2199]
 - new: print IMS Serial numbers in device_version file [2198]
 - new: IRSA with RSC: if both references are PTP select that one with the best PTP accuracy [2197]
 - new: rename set_current_selected_ptp_slave() to get_current_selected_ptp_slave() [2196]
 - fix: fixed set wrong instance id for PTP state on second refclock (no PTP state on second MRS) [2195]
 - new: Holdover for IRSA with RSC [2194]
 - new: extend IRSA for two refclocks (switching refclocks via RSC depending on status and user defined precisions) [2193]
 - fix: when starting NTPd before setting first system time then NTP will answer with clock not synchronized and stratum 0 [2191]
 - fix: if SHS mode activated or restrict_ntp_access_while_init flag is activated then wait for function call create_last_initial_offset() [2192]
 - new: print RSC Diff to xmr_info file [2190]
 - new: support for SHS with new RSC in IMS system with differences of both refclocks meassured by RSC [2189]
 - new: rename files esi_io.c and esi_io.h to ims_io.c and ims_io.h [2188]
 - fix: fixed wrong reference clock name [null] in case of GLN with MRS [2187]




Close V6.17 Changelog

------------------------------------------

Version 6.16.011:   [2015-10-20]
 - fix: NTP Version 4.2.8p4 [3705]

Version 6.16.010:   [2015-08-14]
 - fix: NTP Monlist was not correctly represented on web GUI [3393]
 - fix: Sporadic NTP Client Counter crashes [3392]
 - fix: Power supply index numbering not correct in SNMP [3391]
 - fix: IPv6 addresses malformed in configuration [3390]
 - new:  OpenSSL update to 0.9.8zg. Fixes CVE-2015-1789, CVE-2015-1790, CVE-2015-1791, CVE-2015-1792 [3389]

Version 6.16.009:   [2015-04-20]
 - fix: fixed problem when setting time on front panel (could not change value for hours or days) [3002]
 - fix: added IP address of client to Notification message 'Client Limit Exceeded' [2893]
 - fix: Manual configuration fixed [2933]
 - fix: fixed sporadical error message 'Second Refclock not responding' [2955]
 - fix: fixed unlocking front panel key-pad-lock via USB Stick [2962]
 - fix: fixed wrong number of good svs via SNMP request [2988]
 - fix: if no hostname is set, restore it using the default configuration [2958]
 - fix: Services like HTTP started although not enabled on any interface [2960]
 - fix: Updated OpenSSL to 0.9.8zf: Fixes CVE-2015-0209, CVE-2015-0286, CVE-2015-0287, CVE-2015-0288, CVE-2015-0289, CVE-2015-0293 [2953]
 - fix: fixed problems with FDM and GPS if FDM found as first device [2896]
 - fix: NTP does not start sometimes [2895]

Version 6.16.008:   [2015-03-05]
 - fix: Remote Access Control List not imported when updating from 6.14.xxx [2525]
 - fix: SNMP daemon restarted correctly if config changed [2873]
 - fix: fixed if SNMP activated then set Engine ID from User [2866]
 - fix: Value of SNMP V3 user rights not shown correctly in web interface [2871]
 - fix: Update (backported) glibc to fix CVE-2014-9402 (glibc infinite loop) [2869]
 - fix: fixed wrong count of good GPS SVs in case of mixed mode GPS/GLONASS on front display and logfiles [2845]
 - fix: DHCP client processes restarted when hostname changes to notify DHCP server [2635]
 - fix: Updated libc function'__nss_hostname_digits_dots to fix CVE-2015-0235 (GHOST) [2793]
 - new: Trustime for every clock separately configurable now [2733]
 - fix: Uptime not shown correctly on RDT units [2528]
 - fix: OpenSSL Version 0.9.8ze, fixing several vulnerabilities [2663]

Version 6.16.007:   [2015-01-06]
 - fix: if found SF10xx without internal refclock then disable serial reference [1433]
 - fix: configuration loss in 6.16.006  [2503]
 - fix: too many syslog entries due to unnecessary AVAHI service (re)starts [2504]

Version 6.16.006:   [2014-12-22]
 - fix: Fixes for multiple NTP Vulnerabilites - see MSA1405  [2498]
 - new: support remote syslog servers with IPv6 addresses [2400]
 - fix: fixed if no leapsecond announced then do not show leapsecond date in log and status files [2455]
 - fix: made connect call non-blocking when FDM displays are unreachable [2453]
 - fix: Empty user in user list fixed. [2436]
 - fix: fixed display errors on serial port configuration for DCF,WWVB and MSF [2429]

Version 6.16.005:   [2014-11-20]
 - fix: PPS initialization routine for NTP improved [2169]
 - fix: set NTP refid to WWVB, MSF or JJY if appropriate refclock has been found [1197]
 - fix: Remote Accounts were not correctly created for TACACS and RADIUS access [2170]
 - new: remove passwords and other security relevant information from diag_file [1122]
 - new: Confguration import from V5 and V6.14 now correctly imports most settings  [811]

Version 6.16.004:   [2014-10-31]
 - fix: Update to OpenSSL 0.9.8zc to fix OpenSSL 3.0 vulnerability ("POODLE") [1447]
 - fix: TACACS login to CLI now works for superuser accounts [1446]
 - fix: Websession authentication problems fixed [1445]
 - fix: Nameserver and Syslogserver can get lost after saving configuration [1444]
 - fix: removed default routes for IPv6 linklocal interfaces [1195]
 - fix: serial console baudrate is now 38400 only [1434]
 - new: Added Gateway rules for CLuster IPs [1438]
 - fix: network interface order preserved at all times [1430]
 - fix: if NTP stopped due to SHS time limit error then stop checking SHS time limits [1426]

Version 6.16.003:   [2014-10-14]
 - new: new parameters for cluster mode added (refresh MC join+refresh interval) [1402]
 - fix: no prog pulses and serial ports visible anymore on M200 [1401]
 - fix: fixed error messages "not sync" - "sync" within 10s with MRS receiver [1362]
 - fix: added 'System Info' menu in M300 system menu to be compatible with other display types [1399]
 - new: added display menu to set system time [1398]
 - new: Support RDT in Syncfire without reference clock [1397]

Version 6.16.002:   [2014-10-01]
 - fix: fixed limited MRS holdover time on display (<256h) [1356]
 - fix: fixed wrong message on display if changes NTP configuration after restart via WEB interface [1386]
 - new: Syncfire: if found no refclock then reboot after 3min [1385]
 - fix: handle antenna faulty detection in case of PZF [1388]
 - new: set serial output configuration for WWVB and MSF via Front Display [1341]
 - fix: fixed wrong display menu in PTP settings (Delay Mech. and Protocol type in Slave Mode) [1392]
 - fix: StrTypeInfo support added for DCF clocks [1393]

Version 6.16.001:   [2014-09-02]
 - fix: SNMP v3 access removed correctly, if deactivated. [1181]




Close V6.16 Changelog