NTP Time Server LANTIME

Our ready-to-run time server appliances named LANTIME is a perfect solution for synchronizing networks of any size. You can choose between several different external sources of time: GPS (globally available), DCF77 (Central Europe) or IRIG. Even if your desired installation location does not allow to receive external signals, our free running clocks can be deployed to keep your network in sync. Our NTP synchronized displays are a perfect addition for control rooms or operation centres.

Overview: Available receiver types for LANTIME time servers

Product Description NTP Time Server

Characteristics NTP Time Server

Display	M200, M300: LC-Display, 2 x 40 characters, with backlight M400, M900: LC-Display, 4 x 16 characters M600: Vacuum fluorescent graphic display (VFD), 256 x 64 dots
Control elements	Eight push buttons to set up basic network parameters and to change receiver settings
Status info	Four bicolor LEDs showing status of: - reference time - time service - network - alarm
Network Interface	Standard: M200: 1 x 10/100 MBit with RJ45 connector M200: 1 x 10/100 MBit with RJ45 connector M300: 2 x 10/100 MBit with RJ45 connector M400: 1 x 10/100 MBit with RJ45 connector M600: 4 x 10/100 MBit with RJ45 connector M900: 1 x 10/100 MBit with RJ45 connector Available Options: M300: 2(up to 4) x additional 10/100 MBit with RJ45 jack 1 x 10/100 MBit and 1 x 10/100/1000 MBit (1GE) with RJ45 connector 1 x 10/100 MBit and 3 x 10/100/1000 MBit (3GE) with RJ45 connector M400: up to 8 x additional 10/100 MBit with RJ45 connector M600: 1 x 10/100 MBit and 3 x 10/100/1000 MBit (3GE) with RJ45 jack M900: up to 8 x additional 10/100 MBit with RJ45 connector
Power supply	Standard: 100-240 VDC / 100-240 VAC (also available in different DC variants)
Universal Serial Bus (USB) Ports	1x USB Port in front panel: - install firmware upgrades - backup and restore configuration files - copy security keys - lock/unlock front keys
Single-Board-Computer	i386 compatible 500Mhz CPU, 128 MB RAM
Operating System of the SBC	Linux with nano kernel (incl. PPSkit)
Network protocols OSI Layer 4 (transport layer)	TCP, UDP
Network protocols OSI Layer 7 (application layer)	TELNET, FTP, SSH (incl. SFTP, SCP), HTTP, HTTPS, SYSLOG, SNMP
Internet Protocol (IP)	IP v4, IP v6
Network Autoconfiguration Support	IPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131) IPv6: Autoconfiguration Networking - AUTOCONF
Network Time Protocol (NTP)	NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905) SNTP v3 (RFC 1769), SNTP v4 (RFC 2030) MD5 Authentication and Autokey Key Management
Time Protocol (TIME)	Time Protocol (RFC 868)
Daytime Protocol (DAYTIME)	Daytime Protocol (RFC 867)
IEC 61850	Synchronization of IEC 61850 compliant devices by using SNTP
Hypertext Transfer Protocol (HTTP)	HTTP/HTTPS (RC 2616)
Secure Shell (SSH)	SSH v1.3, SSH v1.5, SSH v2 (OpenSSH)
Telnet	Telnet (RFC 854-RFC 861)
Simple Network Management Protocol (SNMP)	SNMPv1 (RFC 1157), SNMPv2c (RFC 1901-1908), SNMP v3 (RFC 3411-3418)
Form Factor	19'' aluminium case (1U) Schroff Multipac
Ambient temperature	0 ... 50°C / 32 ... 122°F
Humidity	Max. 85%
Scope of supply	Time Server, power cable and a USB storage device with Quick-Start Guide and a detailed reference manual as PDF file in the "Manual" folder.
Technical Support	Meinberg offers free lifetime technical support via telephone or e-mail.
Warranty	Three-Year Warranty
Firmware Updates	Firmware is field-upgradeable, updates can be installed directly at the unit or via a remote network connection. Software updates are provided free of charge, for the lifetime of your Meinberg product.
RoHS-Status of the product	This product is fully RoHS compliant
WEEE status of the product	This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself.
Additional Information	Additional information about the Meinberg LANTIME family of NTP time servers and other LANTIME models can be found on the LANTIME NTP Time Server Family Page .

More Images NTP Time Server

Overview: NTP Time Server

LANTIME M900
NTP Timeserver Platform for Customized Time and Frequency Synchronization Systems

The Meinberg LANTIME M900 Timeserver can be used all around the world to synchronize even the largest networks in computer centers, industrial network infrastructures and telecom environments. The M900 is Meinbergs system platform for customized solutions and offers a wide range of possible configurations, including a wealth of choices for time and frequency inputs and outputs as well as redundancy enhancements for fail-safe synchronization needs.

LANTIME M600
High End NTP Time Server

The Meinberg LANTIME time server is used around the world to provide accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and uses an integral Meinberg reference clock as its time source to synchronize all timing outputs with the utmost accuracy. The front panel includes a VF Display and keypad for easy configuration, and indication of the receiver and NTP subsystem status. A high quality precision OCXO is standard in the M600, to allow this time server to meet the stringent holdover requirements.

LANTIME M400
Rail Mount NTP Time Server with MEINBERG reference receiver

NTP Time Server with Reference Clock for Industrial Applications
The LANTIME M400 Time Server offers an unparalleled flexibility and versatility and provides accurate time to your network in a compact and full-featured DIN railmount package for industrial applications such as power generation, transmission and distribution (substation automation), process control and industrial automation systems. The M400 includes an LC-Display and keypad and an extremely broad range of available options.

LANTIME M300
NTP Time Server in 1U Case for Server Rackmount

The Meinberg LANTIME M300 time server provides accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and itself is synchronized by any external Meinberg radio clock.

LANTIME M200
Compact NTP Time Server with integrated Reference Clock

LANTIME M200 time servers can be installed to provide accurate time to small and medium sized computer networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a built-in MEINBERG radio clock as its primary reference time source. A stable and precise oscillator is capable of bridging interferences or a temporary loss of reception.

LANTIME M100
NTP Time Server with internal Reference Clock for DIN Rail Installations

LANTIME M100 time servers can be installed to provide accurate time to small and medium sized computer networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a built-in Meinberg radio clock as its primary reference time source. A stable and precise oscillator is capable of bridging interferences or a temporary loss of reception. Its compact form factor offers an ideal solution to network time synchronization needs in industrial and power generation/distribution networks.

SyncFire 1000
High-Performance NTP Time Server

The all-new Meinberg SyncFire 1000 NTP Time Server appliance offers the flexibility and reliability of the Meinberg LANTIME M-Series Product Family in a new package that is optimized for Data Center deployments. Due to its new powerful CPU options, it can synchronize hundreds of thousands of NTP and SNTP clients.