GPS/XHS: Satellite Receiver with integrated power supply for DIN Mounting Rail


The module is suitable for applications that only need a serial RS-232 interface for synchronisation.

The satellite receiver with integrated power supply is assembled in an aluminium profile case for 35 mm DIN mounting rail. The module provides a serial RS-232 interface.

Key Features

Warranty Period (Years): 3 RoHS-compliant
  • RS-232 interface
  • Included GPSANTv2 antenna uses downconverter technology to enable long transmission routes of up to 1100 m (1200 yards) -- with Ultraflex H2010 cable
  • Remote control and monitoring with included PC-software (COM0)
  • Aluminium profile case for 35mm DIN mounting rail
  • Flash-EPROM with bootstrap loader




Product Description



Characteristics

Receiver Type 12 channel GPS C/A-code receiver
Status Indicators Fail-LED shows that the internal timing has not been synchronized or that a system error occurred
Lock-LED shows that the calculation of the position has been achieved after reset
Type of Antenna Included GPSANTv2 antenna with innovative downconverter technology that allows transmission routes of up to 300 m using RG58 cable, 700 m using RG213 cable, and 1100 m using H2010 Ultraflex cable
Synchronization Time Max. 1 minute in normal operating conditions
Max. 25 minutes (average 12 minutes) upon first initialization or in the absence of saved satellite data
Interface Single serial RS-232 interface
Serial Time String Output Baud Rates: 19200 (Default), 9600, 4800, 2400, 1200, 600, 300
Framing: 7N2, 7E1, 7E2, 8N1 (Default), 8N2, 8E1, 8O1

Time String Formatse: Meinberg Standard, Meinberg GPS, SAT, NMEA RMC, NMEA GGA, NMEA ZDA, NMEA RMC GGA (RMC followed by GGA), Uni Erlangen, Computime, Sysplex 1, SPA, RACAL, ION, ION Blanked, IRIG-J-1, 6021
Antenna Connector BNC connector
Power Consumption ca. 10 W
Backup Battery Type Upon loss of power supply to card, the hardware clock runs independently using the on-board quartz oscillator. Almanac data remains stored in battery-backed RAM
Life time of lithium battery min. 10 years
Operating Voltage GPS/DHS: 20 - 60 V DC
GPS/DAHS: 100 - 240 V DC, 100 - 240 V AC
Firmware Flash-EPROM, bootstrap loader
Physical Dimensions 125 mm x 190 (208) mm x 105 mm (W x D x H) for 35mm DIN mounting rail
Supported Temperature Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F)
Supported Humidity Max. 85 % (non-condensing) at 40 °C
Warranty Three-year warranty
Options - second independant interface as RS-232 or RS-485
- PPS with TTL level into 50 Ohm
- PPS as fiber optic output
- 10 MHz with TTL level into 50 Ohm
- oscillator: TCXO, OCXO-SQ up to OCXO-HQ, specifications look at oscillator options
RoHS Status of Product This product is fully RoHS-compliant.
WEEE Status of Product This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself.


Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact