@--- MPSv2 Release Notes: last changes on top ---


Version 2.2.4 - Monday, 2021-04-26

- fix: [NTP]	Interpret and indicate NTP Responses with Key ID 0 as failed authentications
- new: [UI]	Show percental rates of successfull authentications and wrong or unknown key usages


Version 2.2.3 - Tuesday, 2020-09-29

- fix: [UI]	Allow connection to daemons that are not in the same subnet


Version 2.2.2 - Monday, 2020-09-07

- fix: [ALL]	Fixed crash when receiving untagged frames with activated VLAN simulation


Version 2.2.1 - Tuesday, 2020-09-01

- fix: [UI]	Fixed crash after connecting in "Anonymous Mode"
- fix: [UI]	Fixed crash when opening the daemon preferences dialog 


Version 2.2.0 - Monday, 2020-08-31

- new: [UI]	Complete redesign of the user interface (mpsrc)
- new: [PTP]	Added support for PTPv2 power profile C37.238-2017
- new: [PTP]	Added configuration option to allow alteration of correction field without security TLV update
- new: [NTP]	Added support for symmetric key authentication via MD5, SHA1 or AES128CMAC
- fix: [PTP]	Fixed evaluation of PTP security TLV and containing ICV


Version 2.1.2 - Tuesday, 2019-04-02

- fix: [PTP]	Fixed configuration problems with PTP quality parameter "Frequency Traceable"


Version 2.1.1 - Tuesday, 2018-12-18

- fix: [PTP]	Fixed leap second insertion in PTP simulation mode (TAI = monotonic)
- new: [PTP]	Added support for PTPv2 Management (send RESPONSE when receiving GET)


Version 2.1.0 - Monday, 2018-05-28

- new: [PTP]	Added support for PTPv1 (IEEE1588-2002)
- new: [PTP]	Added support for PTPv2.1 (latest IEEE1588 draft)
- new: [PTP]	Added support for G.8275.2 Telecom and 802.1AS PTP profiles
- new: [PTP]	Allow configuration to use own clock ID as GM clock ID
- new: [ALL]	Include/Exclude IPv6 MPS services in the network via checkbox


Version 2.0.8 - Tuesday, 2017-10-10

- fix: [PTP]    Send IGMP join on all network interfaces on service startup


Version 2.0.7 - Tuesday, 2017-09-05

- new: [PTP]    Added several PTP parameters to the command line interface
- fix: [ALL]    Stop all simulations before loading a configuration file


Version 2.0.6 - Monday, 2016-03-06

- new: [PTP]    Added timestamps to MTIE TLV according to updated specification


Version 2.0.4 - Friday, 2016-09-12

- new: [PTP] 	Added feature "Ignore BMCA" to simulate forced masters
- fix: [PTP]	Made Grandmaster Clock ID editable
- fix: [PTP]	Added 2-byte extension for IPv6 packets for UDP checksum calculation
- fix: [PTP]	Allow negative offsets in PTP monitoring TLV
- fix: [PTP]	Do not check IP addresses when IEEE 802.3 group is created
- fix: [ALL]	Allow simulation of dates > 2038


Version 2.0.3 - Monday, 2016-06-06

- new: [PTP]	Added support for MTIE monitoring TLV
- fix: [VLAN] 	Apply VLAN priority other than 0 or 1
- fix: [VLAN]	Do not cut off last 4 bytes of VLAN packets


Version 2.0.2 - Thursday, 2016-04-16

- new: [PTP]	Added timePropertiesDS to PTP monitoring TLV