IMS - LANTIME M500: Time and Frequency Synchronization in Rail Mount Chassis
Key Features
- Optimized space usage
- Synchronization of NTP and SNTP compatible clients
- Web-based status and configuration interface and console-based graphical configuration utility
- IMS - Intelligent Modular System platform
- Up to 2 PTP (IEEE 1588-2008) modules
- Hot Plug
- Arbitrary combinations of modules
- Meinberg's LANTIME time server is available with a variety of additional output options: IRIG Time Code, frequency synthesizer and programmable pulse outputs illustrate some of the many expansion options for your NTP server
- Up to 8 additional LAN ports
-
Previous Models - IMS - LANTIME M500:
LANTIME M400/GPS/PTP :: PTPv2 / IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock
Product Description
The M500 railmount chassis offers the following slot types:-
IMS-PWR High efficiency power supply (AC and DC versions available)
-
IMS-CLK Reference clock module
-
IMS-MRI IRIG, 1PPS, 10MHz input module:
-
IMS-ESI Input references for 2048kHz, 2.048MBit/s and variable frequencies:
MRI and ESI slots are also available for a variety of output signals:
Pulses, Frequencies, Time Codes, Serial time telegrams) and of course more network interfaces (IEEE-1588, NTP ports)
-
IMS-CPU Central processor module providing NTP / SNTP time synchronization and management and configuration interfaces
-
IMS-CES Expansion slot for Error output (standard configuration) and for further
additional output signals (PPS, timecode...):
Rail Mount NTP Time Server for large Networks
With up to 6,000 NTP requests per second, the system is able to provide time for hundreds and thousands of NTP clients. The LANTIME module supports the following protocols: IPv4, IPv6, NTP / SNTP (v2, v3, v4), HTTP (S), SSH, Telnet, SNMP (v1, v2, v3), FTP, SFTP, DHCP/DHCPv6. For each system, up to 99 logical network interfaces are available (99 IPv4 and 99 IPv6 addresses).
Scalable NTP Time Server System
All modules are hot-plug capable and the modules can be configured via the central web interface (from the CPU module). Almost infinite number of combinations of input and output modules are available to meet almost any synchronization task. Because of simple extension by upgrading the system with new modules the scalability of the M500 system is ensured.
Slots for Input Signals:
IMS-MRI:Standard reference inputs
IMS-ESI: Extended reference inputs
Both of these reference input interfaces may also be used as I / O slot.
Front Panel
The front panel of LANTIME M500 integrates the familiar LC-Display with 4x16 characters and the well known LANTIME menu panel with 4 directional and 4 function buttons. This allows for a simple and fast on-site configuration of the main parameters. Hundreds of configuration options for the LANTIME CPU and the IMS input and output modules can be changed using the powerful web interface.
Characteristics
Supported Reference Signals | The following reference sources can be used to synchronize the system:
|
Status Indicators | Four bicolor LEDs showing status of: - reference time - time service - network - alarm |
Display | LC Display, 4 x 16 characters |
Control Elements | Eight push buttons to set up basic network parameters and to change system settings. |
Frequency Outputs | Frequency Synthesizer for arbitrary frequencies between 0.125 Hz and 10 MHz, adjustable phase, output via external modules such as IMS-BPE modules |
Accuracy of Pulse Outputs | Depends on oscillator option:
< ±100ns (TCXO, OCXO LQ) < ±50ns (OCXO SQ, OCXO MQ, OCXO HQ, OCXO DHQ, Rubidium) |
Serial Time String Output |
COM 0:
Baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud Data Format: 8E1, 8E2, 8N1, 8N2, 8O1, 7E1, 7E2, 7N2, 7O1, 7O2 Time Telegram: Meinberg Standard Time String , SAT, NMEA RMC, Uni Erlangen (NTP), COMPUTIME, Sysplex, Capture String, SPA, RACAL, Meinberg GPS, NMEA GGA, NMEA RMC GGA, NMEA ZDA, ION, 6021 or IRIG-J |
Relay Outputs |
Error Relay
|
Network Interface |
Base Chassis:
CPU-C05F1 1 x 10/100 MBit, RJ45 CPU-C15G2 1 x 100/1000BASE-T RJ45 1 x 1000BASE-T SFP Network Expansion - LNE Options: Up to 8 additional network interfaces (GbE Gigabit Support) with 10/100/1000 MBit RJ45 connector or 1000BASE-T SFP (Multimode / Singlemode). |
Universal Serial Bus (USB) Ports | 1x USB Port: - install firmware upgrades - backup and restore configuration files - copy security keys - lock/unlock front keys |
Power Consumption | 50 W max. |
Operating Voltage | Maximum power range: AD10: 90 - 265 V AC, 47-63 Hz / 90-250 V DC DC20: 20 - 60 V DC DC10: 10 - 36 V DC |
Form Factor | Aluminium housing for DIN mounting rail (black powder-coated) |
CPU |
CPU-C15G2
|
Operating System of the SBC | GNU/Linux 4.x |
Network Protocols OSI Layer 4 (Transport Layer) | TCP, UDP |
Network Protocols OSI Layer 7 (Application Layer) | Telnet, FTP, SSH (including SFTP, SCP), HTTP, HTTPS, syslog, SNMP |
Internet Protocol (IP) | IPv4, IPv6 |
Network Autoconfiguration Support | IPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131) IPv6: Dynamic Host Configuration Protocol - DHCPv6 (RFC 3315) and Autoconfiguration Networking - AUTOCONF (RFC 2462) |
Network Time Protocol (NTP) | NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905)
SNTP v3 (RFC 1769), SNTP v4 (RFC 4330) MD5 / SHA-1 Authentication and Autokey Key Management |
Parallel Redundancy Protocol (PRP) | PRP (IEC 62439-3) |
Time Protocol (TIME) | Time Protocol (RFC 868) |
IEC 61850 | Synchronization of IEC 61850-compliant devices using SNTP |
Hypertext Transfer Protocol (HTTP) | HTTP/HTTPS (RC 2616) |
Secure Shell (SSH) | SSH v1.3, SSH v1.5, SSH v2 (OpenSSH) |
Telnet | Telnet (RFC 854-RFC 861) |
Simple Network Management Protocol (SNMP) | SNMPv1 (RFC 1157), SNMPv2c (RFC 1901-1908), SNMP v3 (RFC 3411-3418) |
Physical Dimensions | 118 mm x 193 mm (227 mm)* x 160 mm - width x height x depth
* The sizes in brackets take into account the connections and module handles. |
Supported Temperature | Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F) |
Supported Humidity | Max. 85 % (non-condensing) at 40 °C |
Technical Support | Meinberg offers free lifetime technical support via telephone or e-mail. |
Warranty | Three-year warranty |
Firmware Updates | Firmware is field-upgradeable, updates can be installed directly from the unit or via a remote network connection. Software updates are provided free of charge for the lifetime of your Meinberg product. |
RoHS Status of Product | This product is fully RoHS-compliant. |
WEEE Status of Product | This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself. |
Additional Information | Additional information about the Meinberg LANTIME family of NTP time servers and other LANTIME models can be found on the LANTIME overview page . |
Downloads
Short Info Sheet
Manuals
- Handbuch (deutsch) ltos_7-00.pdf als PDF: 20988KB - Stand: 28.Feb.2022
- Handbuch (deutsch) ltos_7-02.pdf als PDF: 22274KB - Stand: 28.Feb.2022
- Handbuch (deutsch) ltos_7-04.pdf als PDF: 23023KB - Stand: 17.Aug.2022
- Handbuch (deutsch) ltos_7-06.pdf als PDF: 24572KB - Stand: 17.Aug.2022
- Handbuch (deutsch) ltos_7-08.pdf als PDF: 25525KB - Stand: 13.Feb.2024
- Handbuch (deutsch) m500_base.pdf als PDF: 10443KB - Stand: 09.Aug.2022
- Handbuch (deutsch) setup-guide_d.pdf als PDF: 879KB - Stand: 12.Jul.2023
- Manual (english) ltos_6-24.pdf as PDF: 17777KB - Rev.: 2022-Dec-01
- Manual (english) ltos_7-00.pdf as PDF: 19389KB - Rev.: 2022-Feb-28
- Manual (english) ltos_7-02.pdf as PDF: 20740KB - Rev.: 2022-Feb-28
- Manual (english) ltos_7-04.pdf as PDF: 21543KB - Rev.: 2022-Aug-17
- Manual (english) ltos_7-06.pdf as PDF: 23083KB - Rev.: 2022-Aug-17
- Manual (english) ltos_7-08.pdf as PDF: 23916KB - Rev.: 2024-Feb-13
- Manual (english) m500_base.pdf as PDF: 9869KB - Rev.: 2022-Aug-09
- Manual (english) setup-guide_d.pdf as PDF: 879KB - Rev.: 2023-Jul-12
LTOS - CLI and REST API Reference
- For drivers, SDKs, tools and utilities, please check our Download Section