status /
system /
sync-status
CLI REST-API
ref-type
ref-type
This is a read-only object and valid values are:
- none [255]
- gps [0] (standard GPS)
- 10mhz-freqin [1] (10 MHz input frequency)
- pps-in [2] (1 PPS input signal)
- 10mhz-and-pps-in [3] (combined 10 MHz plus PPS)
- irig [4] (IRIG input)
- ntp [5] (Network Time Protocol)
- ptp-ieee1588 [6] (Precision Time Protocol)
- ptp-over-e1 [7] (PTP over E1)
- fixed-freq-in [8] (fixed frequency)
- pps-plus-string [9] (1 PPS in addition to time string)
- var-freq-via-gpio [10] (variable input signal via GPIO)
- unknown [11] (reserved, used internally by firmware only)
- dcf77-pzf-receiver [12] (DCF77 PZF providing much more accuracy than a standard LWR)
- long-wave-receiver [13] (long wave receiver. e.g. DCF77 AM, WWVB, MSF, JJY)
- gnss-receiver [14] (Glonass / GPS receiver)
- havequick-input [15] (HaveQuick input)
- ext-osc [16] (external oscillator disciplined and looped back via 1 PPS I/O)
- synchronous-ethernet [17] (Synchronous Ethernet, needs (external) ethernet interface)
- video-input [18] (Video In (Blackburst, VITC,...))
- linear-time-code [19] (Linear Time Code (Audio))
- int-osc [20] (internal Oscillator)
See also:
/status/system/sync-status: sync-status
/status/system/sync-status/reference: reference
/status/system/sync-status/clock-idx: clock-idx
/status/system/sync-status/osc-type: osc-type
/status/system/sync-status/est-time-quality: est-time-quality
/status/system/sync-status/leapsecond-announced: leapsecond-announced
/status/system/sync-status/leapsecond-date: Format is YYYY-MM-DD
REST-API Support:
This object is supported by the REST API:
Method: GET
URL: /api/status/system/sync-status
Example using curl:
curl /api/status/system/sync-status